- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Thermoseal KLINGERSIL® C-4201 General Application Gasketing
Thermoseal KLINGERSIL® C-4201 General Application Gasketing
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | Thermoseal Inc. |
| Trade Name | KLINGERSIL® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Thermoseal KLINGERSIL® C-4201 General Application Gasketing.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Synthetic FiberNitrile BinderExcellent Resistance to Oil & SolventsGood Anti-Stick PropertiesExcellent OEM MaterialInformation provided by Thermoseal Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.90 g/cc | 0.0686 lb/in³ | ASTM F1315 |
| Thickness | 1588 microns | 62.52 mil | Thickness tested |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 14.0 kV/mm | 356 kV/in | ASTM D149-95a |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | White or Black | (Top/Bottom) |
| Compressibility | 7 percent | ASTM F36J |
| Creep Relaxation | 20 percent | 1/32", ASTM F38B |
| Gas Permeability | <0.5 ml/min | DIN 3535/6 |
| Klinger Hot Compression Test | 11 percent | Initial, Thickness Decrease 73°F (23°C) |
| 19.5 percent | Additional, Thickness Decrease 572°F (300°C) | |
| Leachable Chloride Content | 200 ppm | FSA Method (Typical) |
| Recovery | >50 percent | ASTM F36J |
| Sealability | <0.5 ml/hr | 1/32", ASTM F37A |
| Thickness Increase | 0-5% | ASTM F146 after immersion in ASTM Oil 1, 5h/300°F (149°C) |
| 0-5% | ASTM Oil IRM903, 5h/300°F (149°C) | |
| 0-5% | ASTM Fuel A, 5h/73°F (23°C) | |
| 0-5% | ASTM Fuel B, 5h/73°F (23°C) | |
| Weight Increase | <10% | ASTM F146 after immersion in Fuel B 5h/73°F (23°C) |
Users viewing this material also viewed the following:
- Plastcom PLASTAMID® 66 GF 20 PA66 reinforced with glass fiber
- Polymax® Maxelast® D6880 TPE, Extruded
- Lanxess Durethan® BCF 30 X H2.0 901510 Nylon 6, 30% Glass + Carbon Fiber
- SABIC Innovative Plastics LNP LUBRICOMP IFL21 PA 6/12 (Asia Pacific)
- Techmer ES HiFill® ABS GF5 5% Glass Filled
- SABIC Innovative Plastics Valox® FXV310SK PBT (Europe-Africa-Middle East)
- ChevronTexaco 100 Low Lead Aviation Gasoline
- Dow Elite® 5400 Linear Low Density Polyethylene
- Chosun Refractories SR Blast Furnace Runner Refractory
- AK Steel ASTM A 1011, Class 2 Formable, Grade 60K Hot Rolled Carbon Steel, Medium/High Strength Low Alloy Steel (HSLA)
Copyright © lookpolymers.com All Rights Reserved