- HOME
- POLYMER SEARCH
- Thermoplastic
- Polycarbonate (PC)
- Techmer ES Luriblend® PC MRX BK
Techmer ES Luriblend® PC MRX BK
| Category | Polymer , Thermoplastic , Polycarbonate (PC) |
| Manufacturer | Techmer ES |
| Trade Name | Luriblend® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Techmer ES Luriblend® PC MRX BK.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Availability: North AmericaForms: PelletsAdditive: LubricantFeatures: LubricatedAppearance: BlackInformation provided by TP Composites, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.17 g/cc | 0.0423 lb/in³ | ASTM D792 |
| Water Absorption | 0.10 % @Time 86400 sec |
0.10 % @Time 24.0 hour |
ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.0080 cm/cm @Thickness 3.17 mm |
0.0080 in/in @Thickness 0.125 in |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength | 59.3 MPa | 8600 psi | ASTM D638 |
| Elongation at Yield | 90 % | 90 % | ASTM D638 |
| Flexural Yield Strength | 83.4 MPa | 12100 psi | ASTM D790 |
| Flexural Modulus | 2.34 GPa | 340 ksi | ASTM D790 |
| Izod Impact, Notched | 8.01 J/cm @Thickness 3.17 mm |
15.0 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Izod Impact, Unnotched | NB @Thickness 3.17 mm |
NB @Thickness 0.125 in |
ASTM D256 |
| Coefficient of Friction, Dynamic | 0.090 | 0.090 | ASTM D1894 |
| Coefficient of Friction, Static | 0.060 | 0.060 | ASTM D1894 |
| K (wear) Factor | 117 x 10-8 mm³/N-M | 58.0 x 10-10 in³-min/ft-lb-hr | |
| Limiting Pressure Velocity | 0.788 MPa-m/sec | 22500 psi-ft/min | 10 fpm |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 68.4 µm/m-°C | 38.0 µin/in-°F | ASTM D696 |
| Deflection Temperature at 0.46 MPa (66 psi) | 138 °C | 280 °F | Unannealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 127 °C | 260 °F | Unannealed; ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | ASTM D257 |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID 6 GF 60 000/1M PA6 reinforced with 60% glass fibre
- SABIC Innovative Plastics GELOY CR3020 ASA
- UBE UBESTA® 3030U Nylon 12 (After Formic Acid (10%) for 500 hours)
- Lubrizol Estane® CS195A Thermoplastic Polyurethane
- Unipetrol C4 Fraction
- Lubrizol ESTANE® 5719 Ester Based Thermoplastic Polyurethane (European Grade)
- ExxonMobil Exceed™ 2018KB Metallocene Polyethylene Resin (European Grade)
- Axiall 17881 Wire & Cable Flexible PVC
Copyright © lookpolymers.com All Rights Reserved