- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene Copolymer
- Techmer ES HiFill® PP 0123 C Polypropylene
Techmer ES HiFill® PP 0123 C Polypropylene
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene Copolymer |
| Manufacturer | Techmer ES |
| Trade Name | HiFill® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Techmer ES HiFill® PP 0123 C Polypropylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Availability: North AmericaForms: PelletsFeatures: Copolymer and Thermally ConductiveInformation provided by TP Composites, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.23 g/cc | 0.0444 lb/in³ | ASTM D792 |
| Water Absorption | 0.050 % @Time 86400 sec |
0.050 % @Time 24.0 hour |
ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.0090 cm/cm @Thickness 3.17 mm |
0.0090 in/in @Thickness 0.125 in |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 70 | 70 | ASTM D785 |
| Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D638 |
| Elongation at Break | 30 % | 30 % | ASTM D638 |
| Flexural Strength | 20.7 MPa | 3000 psi | ASTM D790 |
| Flexural Modulus | 1.59 GPa | 230 ksi | ASTM D790 |
| Izod Impact, Notched | 0.534 J/cm @Thickness 3.17 mm |
1.00 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 39.6 µm/m-°C | 22.0 µin/in-°F | ASTM D696 |
| Thermal Conductivity | 1.30 W/m-K | 9.00 BTU-in/hr-ft²-°F | ASTM C177 |
| Deflection Temperature at 0.46 MPa (66 psi) | 79.4 °C | 175 °F | Unannealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 51.7 °C | 125 °F | Unannealed; ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
| Dielectric Strength | 11.8 kV/mm | 300 kV/in | Method A (Short-Time); ASTM D149 |
Users viewing this material also viewed the following:
- Nye Lubricants 925 (HSC) Synthetic Oil
- LG Chemical B240 EPS, Non-Flame Retardant
- LATI Lapex A PES
- SABIC Innovative Plastics PC0800 PC (Europe-Africa-Middle East)
- Techmer ES HiFill® PA6/6 GF30 HS L 30% Glass Filled
- Dow Corning Z-6224 SILANE
- Chosun Refractories MRC-7 Blast Furnace Tap-Hole Refractory
- Arlon 10842S020 0.020" (0.508 mm) Fully Cured, Unsupported, Silicone Rubber
- A. Schulman ComAlloy Hiloy® 613 Nylon 6, Glass Reinforced, UL
- 3M 335 Polyester Protective Tape
Copyright © lookpolymers.com All Rights Reserved