- HOME
- POLYMER SEARCH
- Thermoplastic
- Vinyl (PVC)
- PVC, Molded
- Sylvin Technologies 916V0 Black PVC for Injection Molding
Sylvin Technologies 916V0 Black PVC for Injection Molding
| Category | Polymer , Thermoplastic , Vinyl (PVC) , PVC, Molded |
| Manufacturer | Sylvin Technologies |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Sylvin Technologies 916V0 Black PVC for Injection Molding.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Sylvin Technologies Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.48 g/cc | 1.48 g/cc | |
| Thickness | 3000 microns | 118 mil |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 89 | 89 | 10 seconds |
| Tensile Strength, Ultimate | 15.5 MPa | 2250 psi | |
| Elongation at Break | 320 % | 320 % |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 50.0 °C | 122 °F | RTI |
| Flammability, UL94 | V-0 | V-0 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Comparative Tracking Index | 400 - 600 V | 400 - 600 V | |
| Hot Wire Ignition, HWI | >= 120 sec | >= 120 sec | |
| High Amp Arc Ignition, HAI | 30 - 60 arcs | 30 - 60 arcs |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 171 - 182 °C | 340 - 360 °F |
Users viewing this material also viewed the following:
- Osprey Metals 85/15 Cu Sn Powder (Grade 90% - 16)
- Teknor Apex Telcar® TL-1081B Thermoplastic Elastomer
- TIMCAL TIMREX® KS44 Primary Synthetic Graphite
- ExxonMobil Escorene™ UL 02133EN2 Ethylene Vinyl Acetate Copolymer (European Grade)
- CP-Polymer-Technik Wellamid® 6600 GV 25 DCHP 25% Glass Fiber Nylon 66, Special Heat Ageing Stabilization, Dry
- Covestro Texin® 270 Urethane Thermoplastic Elastomer
- ACC QSil 940 QSI Quantum Silicones 40 Durometer Condensation Cure for Potting
- Plastcom SLOVALEN PQ 83 T 40 PP, 40% mineral filling
- SABIC Innovative Plastics LNP VERTON MV008SXP PP (Europe-Africa-Middle East)
Copyright © lookpolymers.com All Rights Reserved