- HOME
- POLYMER SEARCH
- Superalloy
- Special Metals NIMONIC® Alloy 263
Special Metals NIMONIC® Alloy 263
| Category | Metal , Nonferrous Metal , Nickel Alloy , Superalloy |
| Manufacturer | Special Metals (includes the former Inco Alloys International Inc.) |
| Trade Name | NIMONIC® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Special Metals NIMONIC® Alloy 263.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
A precipitation-hardenable nickel-chromium-cobalt alloy with an addition of molybdenum for solid-solution strengthening. It has high strength and corrosion resistance along with good formability and high-temperature ductility in welded structures. The alloy is especially suitable for sheet applications. Used in gas turbines for rings, casings, and various sheet fabrications. Standard product forms are round, flats, extruded section, tube, plate, sheet, and wire.Data provided by the manufacturer, Special Metals.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.36 g/cc | 0.302 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 760 MPa @Temperature 650 °C |
110000 psi @Temperature 1200 °F |
Precipitation Hardened prior to test |
| 940 MPa @Temperature 23.0 °C |
136000 psi @Temperature 73.4 °F |
||
| Tensile Strength, Yield | 550 MPa @Strain 0.200 % |
79800 psi @Strain 0.200 % |
Precipitation Hardened. Value at room temperature |
| 450 MPa @Strain 0.200 %, Temperature 650 °C |
65300 psi @Strain 0.200 %, Temperature 1200 °F |
Precipitation Hardened prior to test | |
| Elongation at Break | 39 % | 39 % | Precipitation Hardened |
| 30 % @Temperature 650 °C |
30 % @Temperature 1200 °F |
Precipitation Hardened prior to test. |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 10.3 µm/m-°C @Temperature 20.0 - 100 °C |
5.72 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Specific Heat Capacity | 0.461 J/g-°C | 0.110 BTU/lb-°F | |
| Thermal Conductivity | 11.7 W/m-K | 81.2 BTU-in/hr-ft²-°F | |
| Melting Point | 1300 - 1355 °C | 2370 - 2471 °F | |
| Solidus | 1300 °C | 2370 °F | |
| Liquidus | 1355 °C | 2471 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al + Ti | 2.4 - 2.8 % | 2.4 - 2.8 % | |
| Aluminum, Al | <= 0.60 % | <= 0.60 % | |
| Boron, B | <= 0.0050 % | <= 0.0050 % | |
| Carbon, C | 0.040 - 0.080 % | 0.040 - 0.080 % | |
| Chromium, Cr | 19 - 21 % | 19 - 21 % | |
| Cobalt, Co | 19 - 21 % | 19 - 21 % | |
| Copper, Cu | <= 0.20 % | <= 0.20 % | |
| Iron, Fe | <= 0.70 % | <= 0.70 % | |
| Manganese, Mn | <= 0.60 % | <= 0.60 % | |
| Molybdenum, Mo | 5.6 - 6.1 % | 5.6 - 6.1 % | |
| Nickel, Ni | 49 % | 49 % | As remainder |
| Silicon, Si | <= 0.40 % | <= 0.40 % | |
| Sulfur, S | <= 0.0070 % | <= 0.0070 % | |
| Titanium, Ti | 1.9 - 2.4 % | 1.9 - 2.4 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.000115 ohm-cm | 0.000115 ohm-cm | |
| Magnetic Permeability | 1.0008 | 1.0008 | at 200 oersted (15.9 kA/m) |
Users viewing this material also viewed the following:
- Nye Lubricants 880FG (FG) Synthetic Oil
- Huntsman Rexell® V8801 Cast Film Extrusion LLDPE (discontinued **)
- Lehmann & Voss LUVOCOM® 2205-7054 Blend based on polyaryl ether ketone, with glass fiber
- Silberline Extra Sparkle Silvex® 300-10-C
- Techmer ES Plastiblend® TPX-HTN-000AB 15% Glass Filled
- ChevronTexaco Starplex® Moly NLGI Grade 1
- Eurostar Staramide RF003S PA66, 15% Glass Fiber Filled, Injection Molded
- Alliance Polymers Zythane™ 4050D Thermoplastic Polyurethane Elastomer
- Wanhua Chemical Wanthane® WHT-2195 Polycaprolactone Based TPU
Copyright © lookpolymers.com All Rights Reserved