- HOME
- POLYMER SEARCH
- Superalloy
- Special Metals INCONEL® Alloy G-3
Special Metals INCONEL® Alloy G-3
| Category | Metal , Nonferrous Metal , Nickel Alloy , Superalloy |
| Manufacturer | Special Metals (includes the former Inco Alloys International Inc.) |
| Trade Name | INCONEL® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Special Metals INCONEL® Alloy G-3.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
A nickel-chromium-iron alloy with additions of molybdenum and copper. It has good weldability and resistance to intergranular corrosion in the welded condition. The low carbon content helps prevent sensitization and consequent intergranular corrosion of weld heat-affected zones. Use for flue-gas scrubbers and for handling phosphoric and sulfuric acids. Standard product forms are round, plate, sheet, strip, pipe, tube, and wire.Data provided by the manufacturer, Special Metals.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.14 g/cc | 0.294 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 500 MPa @Temperature 550 °C |
72500 psi @Temperature 1020 °F |
Solution Annealed prior to test |
| 690 MPa @Temperature 23.0 °C |
100000 psi @Temperature 73.4 °F |
||
| Tensile Strength, Yield | 320 MPa @Strain 0.200 % |
46400 psi @Strain 0.200 % |
Solution Annealed. Value at room temperature |
| 190 MPa @Strain 0.200 %, Temperature 550 °C |
27600 psi @Strain 0.200 %, Temperature 1020 °F |
Solution Annealed prior to test | |
| Elongation at Break | 60 % | 60 % | Solution Annealed |
| 65 % @Temperature 550 °C |
65 % @Temperature 1020 °F |
Solution Annealed prior to test. |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 14.6 µm/m-°C @Temperature 20.0 - 100 °C |
8.11 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Specific Heat Capacity | 0.452 J/g-°C | 0.108 BTU/lb-°F | |
| Thermal Conductivity | 10.0 W/m-K | 69.4 BTU-in/hr-ft²-°F | |
| Melting Point | 1260 - 1340 °C | 2300 - 2440 °F | |
| Solidus | 1260 °C | 2300 °F | |
| Liquidus | 1340 °C | 2440 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Carbon, C | <= 0.015 % | <= 0.015 % | |
| Chromium, Cr | 21 - 23.5 % | 21 - 23.5 % | |
| Cobalt, Co | <= 5.0 % | <= 5.0 % | |
| Copper, Cu | 1.5 - 2.5 % | 1.5 - 2.5 % | |
| Iron, Fe | 18 - 21 % | 18 - 21 % | |
| Manganese, Mn | <= 1.0 % | <= 1.0 % | |
| Molybdenum, Mo | 6.0 - 8.0 % | 6.0 - 8.0 % | |
| Nickel, Ni | 40 % | 40 % | As remainder |
| Niobium, Nb (Columbium, Cb) | <= 0.50 % | <= 0.50 % | Includes Ta |
| Phosphorous, P | <= 0.040 % | <= 0.040 % | |
| Silicon, Si | <= 1.0 % | <= 1.0 % | |
| Sulfur, S | <= 0.030 % | <= 0.030 % | |
| Tungsten, W | <= 1.5 % | <= 1.5 % |
Users viewing this material also viewed the following:
- PolyOne Geon™ Vinyl Wire & Cable 3201-xx05D Polyvinyl Chloride, Flexible (PVC, Flexible)
- SABIC Innovative Plastics Cycolac® S702S ABS (Europe-Africa-Middle East)
- Techmer ES Luriblend® PA6/6 LX Nylon 66
- Lubrizol ESTANE® T5275 Ether Based Thermoplastic Polyurethane (European Grade)
- Unitika AXG-1500-300 Conditioned
- Hexcel® HexPly® F650 Bismaleimide Resin with Fiberglass 7781 fabric reinforcement
- Master Bond EP31 High Shear and Peel Strength Room Temperature Curing Epoxy
- Tra-Con Tra-Bond 2101 General Purpose Epoxy Adhesive
- Chengdu Polyster 6502 High Performance Grade TPV
- Bapolene® 142A Polyethylene Film Grade
Copyright © lookpolymers.com All Rights Reserved