- HOME
- POLYMER SEARCH
- Superalloy
- Special Metals INCONEL® Alloy C-276
Special Metals INCONEL® Alloy C-276
| Category | Metal , Nonferrous Metal , Nickel Alloy , Superalloy |
| Manufacturer | Special Metals (includes the former Inco Alloys International Inc.) |
| Trade Name | INCONEL® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Special Metals INCONEL® Alloy C-276.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
A nickel-molybdenum-chromium alloy with an addition of tungsten having excellent corrosion resistance in a wide range of severe environments. The high molybdenum content makes the alloy especially resistant to pitting and crevice corrosion. The low carbon content minimizes carbide precipitation during welding to maintain corrosion resistance in as-welded structures. Used in pollution control, chemical processing, pulp and paper production, and waste treatment. Standard product forms are round, forging stock, tube, pipe, plate, sheet, strip, and wire.Data provided by the manufacturer, Special Metals.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.89 g/cc | 0.321 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 790 MPa | 115000 psi | Annealed |
| 620 MPa @Temperature 550 °C |
89900 psi @Temperature 1020 °F |
Annealed prior to test | |
| Tensile Strength, Yield | 415 MPa | 60200 psi | Annealed |
| 230 MPa @Temperature 550 °C |
33400 psi @Temperature 1020 °F |
Annealed prior to test | |
| Elongation at Break | 62 % | 62 % | Annealed prior to test. |
| 60 % @Temperature 550 °C |
60 % @Temperature 1020 °F |
Annealed prior to test. |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 12.2 µm/m-°C @Temperature 20.0 - 100 °C |
6.78 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Specific Heat Capacity | 0.427 J/g-°C | 0.102 BTU/lb-°F | |
| Thermal Conductivity | 9.80 W/m-K | 68.0 BTU-in/hr-ft²-°F | |
| Melting Point | 1325 - 1370 °C | 2417 - 2500 °F | |
| Solidus | 1325 °C | 2417 °F | |
| Liquidus | 1370 °C | 2500 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Carbon, C | <= 0.010 % | <= 0.010 % | |
| Chromium, Cr | 14.5 - 16.5 % | 14.5 - 16.5 % | |
| Cobalt, Co | <= 2.5 % | <= 2.5 % | |
| Iron, Fe | 4.0 - 7.0 % | 4.0 - 7.0 % | |
| Manganese, Mn | <= 1.0 % | <= 1.0 % | |
| Molybdenum, Mo | 15 - 17 % | 15 - 17 % | |
| Nickel, Ni | 55 % | 55 % | As remainder |
| Phosphorous, P | <= 0.040 % | <= 0.040 % | |
| Silicon, Si | <= 0.080 % | <= 0.080 % | |
| Sulfur, S | <= 0.030 % | <= 0.030 % | |
| Tungsten, W | 3.0 - 4.5 % | 3.0 - 4.5 % | |
| Vanadium, V | <= 0.35 % | <= 0.35 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0001229 ohm-cm | 0.0001229 ohm-cm | |
| Magnetic Permeability | 1.0002 | 1.0002 | at 200 oersted (15.9 kA/m) |
Users viewing this material also viewed the following:
- Plaskolite West Optix® CA - 1000 I High Impact Acrylic Resin
- Polimeri Europa Dutral® CO 038 PL Ethylene - Propylene
- Nye Lubricants 345 (SO) Synthetic Oil
- Intercontinental Polymers 216 PET Polymer Type - Semi-Dull, Polyester Pellets
- LATI Latilub 66-02S PA66, Silicone Filled
- Sharadaa Ceramics REFPLAST 60 60% Alumina Plastic
- Shuman 811 Black Polystyrene Medium Impact
- TIMCAL TIMREX® MK25 Primary Synthetic Graphite
- Covestro Bayblend® KU 2-1480 Polycarbonate/ABS Blend
Copyright © lookpolymers.com All Rights Reserved