- HOME
- POLYMER SEARCH
- Superalloy
- Special Metals INCONEL® Alloy 617
Special Metals INCONEL® Alloy 617
| Category | Metal , Nonferrous Metal , Nickel Alloy , Superalloy |
| Manufacturer | Special Metals (includes the former Inco Alloys International Inc.) |
| Trade Name | INCONEL® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Special Metals INCONEL® Alloy 617.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
A nickel-chromium-cobalt-molybdenum alloy with an exceptional combination of metallurgical stability, strength, and oxidation resistance at high temperatures. Resistance to oxidation is enhanced by an aluminum addition. The alloy also resists a wide range of corrosive aqueous environments. Used in gas turbines for combustion cans, ducting, and transition liners; for petrochemical processing; for heat-treating equipment; and in nitric acid production. Standard product forms are round, forging stock, extruded section, plate, sheet, strip, pipe, tube, and wire.Data provided by the manufacturer, Special Metals.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.36 g/cc | 0.302 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 570 MPa @Temperature 650 °C |
82700 psi @Temperature 1200 °F |
Solution Annealed prior to test |
| 710 MPa @Temperature 23.0 °C |
103000 psi @Temperature 73.4 °F |
||
| Tensile Strength, Yield | 340 MPa @Strain 0.200 % |
49300 psi @Strain 0.200 % |
Solution Annealed. Value at room temperature |
| 220 MPa @Strain 0.200 %, Temperature 650 °C |
31900 psi @Strain 0.200 %, Temperature 1200 °F |
Solution Annealed prior to test | |
| Elongation at Break | 62 % | 62 % | Solution Annealed |
| 50 % @Temperature 650 °C |
50 % @Temperature 1200 °F |
Solution Annealed prior to test. |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 11.6 µm/m-°C @Temperature 20.0 - 100 °C |
6.44 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Specific Heat Capacity | 0.419 J/g-°C | 0.100 BTU/lb-°F | |
| Thermal Conductivity | 13.6 W/m-K | 94.4 BTU-in/hr-ft²-°F | |
| Melting Point | 1330 - 1380 °C | 2430 - 2520 °F | |
| Solidus | 1330 °C | 2430 °F | |
| Liquidus | 1380 °C | 2520 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Aluminum, Al | 0.80 - 1.5 % | 0.80 - 1.5 % | |
| Boron, B | <= 0.0060 % | <= 0.0060 % | |
| Carbon, C | 0.050 - 0.15 % | 0.050 - 0.15 % | |
| Chromium, Cr | 20 - 24 % | 20 - 24 % | |
| Cobalt, Co | 10 - 15 % | 10 - 15 % | |
| Copper, Cu | <= 0.50 % | <= 0.50 % | |
| Iron, Fe | <= 3.0 % | <= 3.0 % | |
| Manganese, Mn | <= 1.0 % | <= 1.0 % | |
| Molybdenum, Mo | 8.0 - 10 % | 8.0 - 10 % | |
| Nickel, Ni | >= 44.5 % | >= 44.5 % | |
| Silicon, Si | <= 1.0 % | <= 1.0 % | |
| Sulfur, S | <= 0.015 % | <= 0.015 % | |
| Titanium, Ti | <= 0.60 % | <= 0.60 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.000122 ohm-cm | 0.000122 ohm-cm |
Users viewing this material also viewed the following:
- Quadrant EPP Quadrant PPSU LSG PPSU, Extruded, Unfilled, Polyphenylsulfone (ASTM Product Data Sheet)
- PolyOne Geon™ Vinyl Flexible 86479 Natural Polyvinyl Chloride, Flexible (PVC, Flexible)
- Indium Corp. Indalloy 86 Bismuth-Cadmium Solder Alloy
- SABIC Innovative Plastics LNP LUBRICOMP LX91475 PEEK
- Techmer ES HiFill® PA6 GF20 L BK002 20% Glass Filled
- Washington Penn PPH3TF4-BLK Polypropylene, 40% Talc Filled
- A. Schulman POLYFLAM™ RPP 1021 General Purpose Copolymer Polypropylene
- ATI Allegheny Ludlum 310Si Austenitic Stainless Steel
- Resinlab® EP1240RC Flame Retardant Epoxy Casting Resin
Copyright © lookpolymers.com All Rights Reserved