Solvay Specialty Polymers Udel® P-1710 Polysulfone (PSU) (Unverified Data**)

Category	Polymer , Thermoplastic , Polysulfone (PSU)
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers Udel® P-1710 Polysulfone (PSU) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Udel P-1710 polysulfone (PSU) is a tough, rigid, high-strength thermoplastic that is suitable for continuous use up to 300°F (149°C). The resin is resistant to oxidation and hydrolysis and withstands prolonged exposure to high temperatures and repeated sterilization. Udel P-1710 polysulfone is highly resistant to mineral acids, alkali and salt solutions. Its resistance to detergents and hydrocarbon oils is good, but it will be attacked by polar solvents such as ketones, chlorinated hydrocarbons and aromatic hydrocarbons. The resin is also highly resistant to degradation by gamma or electron beam radiation. Electrical properties are stable over a wide temperature range and after immersion in water or exposure to high humidity. - Natural: Udel P-1710 NT 15Information provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Specific Gravity	1.24 g/cc	1.24 g/cc	ASTM D792
Water Absorption	0.30 % @Time 86400 sec	0.30 % @Time 24.0 hour	ASTM D570
Linear Mold Shrinkage, Flow	0.0070 cm/cm	0.0070 in/in	ASTM D955
Melt Flow	7.0 g/10 min @Load 2.16 kg, Temperature 343 °C	7.0 g/10 min @Load 4.76 lb, Temperature 649 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength	70.3 MPa	10200 psi	ASTM D638
Elongation at Break	50 - 100 %	50 - 100 %	ASTM D638
Tensile Modulus	2.48 GPa	360 ksi	ASTM D638
Flexural Strength	106 MPa	15400 psi	ASTM D790
Flexural Modulus	2.69 GPa	390 ksi	ASTM D790
Izod Impact, Notched	0.690 J/cm	1.29 ft-lb/in	ASTM D256
Tensile Impact Strength	420 kJ/m²	200 ft-lb/in²	ASTM D1822

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	56.0 µm/m-°C	31.1 µin/in-°F	ASTM D696
Deflection Temperature at 1.8 MPa (264 psi)	174 °C	345 °F	Unannealed; ASTM D648

Electrical Properties	Metric	English	Comments
Volume Resistivity	5.00e+16 ohm-cm	5.00e+16 ohm-cm	ASTM D257
Dielectric Constant	3.1 @Frequency 1.00e+6 Hz	3.1 @Frequency 1.00e+6 Hz	ASTM D150
	3.14 @Frequency 1000 Hz	3.14 @Frequency 1000 Hz	ASTM D150
	3.15 @Frequency 60.0 Hz	3.15 @Frequency 60.0 Hz	ASTM D150
Dielectric Strength	17.0 kV/mm	432 kV/in	ASTM D149
Dissipation Factor	0.0011 @Frequency 60.0 Hz	0.0011 @Frequency 60.0 Hz	ASTM D150
	0.0013 @Frequency 1000 Hz	0.0013 @Frequency 1000 Hz	ASTM D150
	0.0050 @Frequency 1.00e+6 Hz	0.0050 @Frequency 1.00e+6 Hz	ASTM D150

Processing Properties	Metric	English
Melt Temperature	329 - 385 °C	624 - 725 °F
Mold Temperature	121 - 163 °C	250 - 325 °F
Drying Temperature	135 - 163 °C	275 - 325 °F
Dry Time	3.50 hour	3.50 hour
Shot Size	50 - 75 %	50 - 75 %

Descriptive Properties	Value	Comments
Agency Ratings	NSF 61	Tested at 82 °C (180 °F) (Commercial Hot)
Appearance	Colors Available
	Opaque
Availability	Asia Pacific
	Europe
	North America
	South America
Features	Acid Resistant
	Alcohol Resistant
	Alkali Resistant
	Good Chemical Resistance
	Good Dimensional Stability
	Good Toughness
	High Heat Resistance
	Hydrocarbon Resistant
	Hydrolytically Stable
Forms	Pellets
Generic	PSU
Processing Method	Extrusion
	Film Extrusion
	Injection Molding
	Pipe Extrusion
	Profile Extrusion
	Sheet Extrusion
RoHS Compliance	RoHS Compliant
Uses	Appliance Components
	Appliances
	Electrical Parts
	Electrical/Electronic Applications
	Fittings
	Food Service Applications
	Industrial Parts
	Microwave Cookware
	Piping
	Plumbing Parts
	Valves/Valve Parts

Users viewing this material also viewed the following: