Solvay Specialty Polymers RytonÂ® BR42B Polyphenylene Sulfide (PPS), 40% Glass Fiber

Category	Polymer , Thermoplastic , Polyphenylene Sulfide (PPS) , Polyphenylene Sulfide (PPS) with 40% Glass Fiber Filler
Manufacturer	Solvay Specialty Polymers
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers RytonÂ® BR42B Polyphenylene Sulfide (PPS), 40% Glass Fiber.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

RytonÂ® BR42B 40% glass fiber reinforced polyphenylene sulfide compound is specially formulated to provide low coefficient of friction and reduced wear rate for use in applications requiring low surface friction and/or wear.Features: Good Wear Resistance; Low FrictionAdditional Properties: Wear Rate - ASTM D3702 5.00E-5 m/hrAutomotive Specifications PSA Peugeot-CitroÃ«n SPA X62 5102Information provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Density	1.76 g/cc	0.0636 lb/inÂ³	ASTM D792
Filler Content	40 %	40 %	Glass Fiber
Water Absorption	0.020 % @Time 86400 sec	0.020 % @Time 24.0 hour	ISO 62
Linear Mold Shrinkage, Flow	0.0020 cm/cm @Thickness 3.18 mm	0.0020 in/in @Thickness 0.125 in
Linear Mold Shrinkage, Transverse	0.0050 cm/cm @Thickness 3.20 mm	0.0050 in/in @Thickness 0.126 in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	97	97	ASTM D785
Hardness, Rockwell R	117	117	ASTM D785
Tensile Strength	186 MPa	27000 psi	ASTM D638
Tensile Stress	190 MPa	27600 psi	ISO 527-2
Elongation at Break	1.6 %	1.6 %	ISO 527-2
	1.6 %	1.6 %	ASTM D638
Flexural Strength	269 MPa	39000 psi	ASTM D790
	280 MPa	40600 psi	ISO 178
Flexural Modulus	14.0 GPa	2030 ksi	ISO 178
	14.5 GPa	2100 ksi	ASTM D790
Compressive Strength	255 MPa	37000 psi	ASTM D695
Poissons Ratio	0.40	0.40	ASTM E132
Izod Impact, Notched	0.910 J/cm @Thickness 3.18 mm	1.70 ft-lb/in @Thickness 0.125 in	ASTM D256
Izod Impact, Unnotched	7.50 J/cm @Thickness 3.18 mm	14.1 ft-lb/in @Thickness 0.125 in	ASTM D256
Izod Impact, Notched (ISO)	9.50 kJ/mÂ²	4.52 ft-lb/inÂ²	Notch A; ISO 180
Izod Impact, Unnotched (ISO)	40.0 kJ/mÂ²	19.0 ft-lb/inÂ²	ISO 180
Coefficient of Friction, Dynamic	0.32	0.32	vs. Itself; ASTM D1894

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	10.0 Âµm/m-Â°C @Temperature 100 - 200 Â°C	5.56 Âµin/in-Â°F @Temperature 212 - 392 Â°F	2
	15.0 Âµm/m-Â°C @Temperature -50.0 - 50.0 Â°C	8.33 Âµin/in-Â°F @Temperature -58.0 - 122 Â°F	2
CTE, linear, Transverse to Flow	40.0 Âµm/m-Â°C @Temperature -50.0 - 50.0 Â°C	22.2 Âµin/in-Â°F @Temperature -58.0 - 122 Â°F	TMA; ASTM E831
	80.0 Âµm/m-Â°C @Temperature 100 - 200 Â°C	44.4 Âµin/in-Â°F @Temperature 212 - 392 Â°F	TMA; ASTM E831
Thermal Conductivity	0.330 W/m-K	2.29 BTU-in/hr-ftÂ²-Â°F	ASTM C177
Maximum Service Temperature, Air	180 Â°C	356 Â°F	UL Temperature Rating
Deflection Temperature at 1.8 MPa (264 psi)	265 Â°C	509 Â°F	Unannealed; ASTM D648
Flammability, UL94	V-0 @Thickness 1.60 mm	V-0 @Thickness 0.0630 in
Oxygen Index	48 %	48 %	ASTM D2863

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	ASTM D257
Surface Resistance	1.00e+16 ohm	1.00e+16 ohm	ASTM D257
Insulation Resistance	1.00e+11 ohm @Temperature 90.0 Â°C	1.00e+11 ohm @Temperature 194 Â°F	IEC 60167
Dielectric Constant	3.7 @Frequency 1000 Hz	3.7 @Frequency 1000 Hz	ASTM D150
	3.7 @Frequency 1.00e+6 Hz	3.7 @Frequency 1.00e+6 Hz	ASTM D150
Dielectric Strength	22.0 kV/mm	559 kV/in	ASTM D149
Dissipation Factor	0.0020 @Frequency 1000 Hz	0.0020 @Frequency 1000 Hz	ASTM D150
	0.0030 @Frequency 1.00e+6 Hz	0.0030 @Frequency 1.00e+6 Hz	ASTM D150
Comparative Tracking Index	150 V	150 V	UL 746

Descriptive Properties	Value	Comments
Availability	Asia Pacific
	Europe
	Latin America
	North America
Color	Natural
Form	Pellets
Processing Technique	Injection Molding
RoHS Compliance	RoHS Compliant

Users viewing this material also viewed the following: