- HOME
- POLYMER SEARCH
- Fluid
- Solvay Specialty Polymers Galden® HT270 PFPE Heat Transfer Fluid
Solvay Specialty Polymers Galden® HT270 PFPE Heat Transfer Fluid
| Category | Fluid , Polymer |
| Manufacturer | Solvay Specialty Polymers (former Solexis) |
| Trade Name | Galden® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Solvay Specialty Polymers Galden® HT270 PFPE Heat Transfer Fluid.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Galden® HT grades are specifically recommended for use as heat transfer fluids.Galden® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of service temperature ranges, are available. Uses include heat transfer, electronic reliability testing, vapor phase soldering, solvents, and acid spill mitigation.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.85 g/cc @Temperature 25.0 °C |
0.0668 lb/in³ @Temperature 77.0 °F |
|
| Solubility of Water | 0.0014 % | 0.0014 % | |
| Kinematic Viscosity | 11.7 cSt @Temperature 25.0 °C |
11.7 cSt @Temperature 77.0 °F |
|
| Molecular Weight | 1550 g/mol | 1550 g/mol | average |
| Vapor Pressure | 0.00000400 bar @Temperature 25.0 °C |
0.00300 torr @Temperature 77.0 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Heat of Vaporization | 62.8 J/g @Temperature 270 °C |
27.0 BTU/lb @Temperature 518 °F |
at boiling point |
| CTE, linear | 367 µm/m-°C | 204 µin/in-°F | converted from volumetric expansion of 0.0011 cm<sup>3</sup>/cm<sup>3</sup>-°C |
| Specific Heat Capacity | 0.960 J/g-°C | 0.229 BTU/lb-°F | |
| Thermal Conductivity | 0.0650 W/m-K | 0.451 BTU-in/hr-ft²-°F | |
| Boiling Point | 270 °C | 518 °F | |
| Maximum Service Temperature, Air | 270 °C | 518 °F | as heat transfer fluid |
| Minimum Service Temperature, Air | 25.0 °C | 77.0 °F | as heat transfer fluid |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 6.00e+15 ohm-cm | 6.00e+15 ohm-cm | |
| Dielectric Constant | 1.94 @Frequency 1000 Hz |
1.94 @Frequency 1000 Hz |
|
| Dielectric Strength | 15.7 kV/mm | 399 kV/in | 2.54 mm gap |
| Dissipation Factor | 0.00020 @Frequency 1000 Hz |
0.00020 @Frequency 1000 Hz |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | Clear and odorless | |
| Solubility of Air (cm³ gas / 100 cm³ liquid) | 26 |
Users viewing this material also viewed the following:
- REXtac Rextac® RT 3535 Amorphous Polyalphaolefin (APAO)
- Momentive Performance Materials RTV5242 Neutral Cure, One Component RTV Adhesive Sealant
- SABIC Innovative Plastics LNP LUBRICOMP RP004 PA 66 (Asia Pacific)
- Teijin Panlite® LS-2250 Friction and Abrasion Resistant Polycarbonate Resin
- Teknor Apex APEX® 3311-50 Polyvinyl Chloride, Flexible
- Teknor Apex Monprene® MP-1274G Thermoplastic Elastomer
- Teknor Apex Monprene® MP-1848K Thermoplastic Elastomer
- Dow Corning 1248 Fluid
- ACC QM128 QSI Quantum Silicones 28 Durometer Condensation Cured Moldmaking Material
Copyright © lookpolymers.com All Rights Reserved