Solvay Specialty Polymers AvaSpire® AV-848 CF30 Polyaryletherketone (PAEK) (Unverified Data**)

Category	Polymer , Thermoplastic , Polyketone , Polyaryletherketone (PAEK), Carbon Fiber Filled
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers AvaSpire® AV-848 CF30 Polyaryletherketone (PAEK) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

AvaSpire AV-848 CF30 is a 30% carbon fiber-reinforced, high-temperature, polyaryletherketone (PAEK) that has been specifically formulated to provide several performance advantages over comparable grades of PEEK. These include: improved dimensional stability, higher stiffness and lower CLTE from 150°C to 240°C, and lower modulus for greater flexibility at room temperature. High temperature AV-848 CF30 provides design engineers with an alternative to reinforced PEEK, specifically in demanding applications that require superior toughness, higher structural integrity, and exceptional chemical resistance. AvaSpire AV-848 CF30 can be easily processed using standard thermoplastic melt processing techniques, including injection molding and extrusion.Injection Notes: Back Pressure: MinimumInformation provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Specific Gravity	1.42 g/cc	1.42 g/cc	ASTM D792
Filler Content	30 %	30 %	Carbon Fiber Reinforcement
Water Absorption	0.10 % @Time 86400 sec	0.10 % @Time 24.0 hour	ASTM D570
Linear Mold Shrinkage, Flow	0.00 - 0.0020 cm/cm	0.00 - 0.0020 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.0040 - 0.0060 cm/cm	0.0040 - 0.0060 in/in	ASTM D955
Melt Flow	3.5 g/10 min @Load 2.16 kg, Temperature 400 °C	3.5 g/10 min @Load 4.76 lb, Temperature 752 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength	176 MPa	25500 psi	5.0 mm/min; ASTM D638
Elongation at Break	1.5 %	1.5 %	5.0 mm/min; ASTM D638
Tensile Modulus	18.8 GPa	2730 ksi	5.0 mm/min; ASTM D638
Flexural Strength	259 MPa	37600 psi	ASTM D790
Flexural Modulus	16.5 GPa	2390 ksi	ASTM D790
Compressive Strength	145 MPa	21000 psi	ASTM D695
Shear Strength	95.0 MPa	13800 psi	ASTM D732
Izod Impact, Notched	0.430 J/cm	0.806 ft-lb/in	ASTM D256
	5.30 J/cm	9.93 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Thermal Conductivity	0.0370 W/m-K	0.257 BTU-in/hr-ft²-°F	ASTM E1530
Melting Point	340 °C	644 °F	Peak; ASTM D3418
Deflection Temperature at 1.8 MPa (264 psi)	257 °C	495 °F	Annealed; ASTM D648
Glass Transition Temp, Tg	158 °C	316 °F	DSC

Processing Properties	Metric	English
Rear Barrel Temperature	366 °C	691 °F
Middle Barrel Temperature	371 °C	700 °F
Front Barrel Temperature	377 °C	711 °F
Nozzle Temperature	382 °C	720 °F
Melt Temperature	382 - 404 °C	720 - 759 °F
Mold Temperature	166 - 193 °C	331 - 379 °F
Drying Temperature	149 °C	300 °F
Dry Time	4.00 hour	4.00 hour

Descriptive Properties	Value	Comments
Appearance	Black
Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Features	Fatigue Resistant
	Flame Retardant
	Good Chemical Resistance
	Good Dimensional Stability
	High Heat Resistance
	High Stiffness
	High Strength
Forms	Pellets
Generic	PAEK
Injection Rate	Fast
Processing Method	Injection Molding
	Machining
	Profile Extrusion
Screw Compression Ratio	2.0:1.0 to 3.0:1.0
Uses	Bearings
	Bushings
	Oil/Gas Applications
	Seals
	Wear Strip

Users viewing this material also viewed the following: