- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Silikony Polskie Gumosil WW Silicone Rubber
Silikony Polskie Gumosil WW Silicone Rubber
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) , Silicone , Silicone Rubber |
| Manufacturer | Silikony Polskie |
| Trade Name | Gumosil |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Silikony Polskie Gumosil WW Silicone Rubber.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Flexible with good tearing resistance
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.20 g/cc | 1.20 g/cc | Before Curing |
| Viscosity | 30000 cP | 30000 cP | Before Curing |
| Linear Mold Shrinkage | 0.010 cm/cm | 0.010 in/in | After Curing |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 30 | 30 | After Curing |
| Tensile Strength at Break | 4.00 MPa | 580 psi | After Curing |
| Elongation at Break | 400 % | 400 % | After Curing |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 180 °C | 356 °F |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | <= 1440 min | <= 24.0 hour | Curing |
| Pot Life | 30 min | 30 min | Curing |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Beige |
Users viewing this material also viewed the following:
- Oceanchem Group 3,5-dibromo-4-(2,3-dibromopropoxy) diphenyl sulfone (Octabromobisphenol S)
- PEAK Werkstoff DISPAL S270 Aluminum Alloy, AlSi25Fe4Ni3CuMgMnCrTi, Condition T4
- Permabond 920 Cyanoacrylate, High temperature
- Huntsman Araldite EPN 1180 Epoxy Phenol Novolac
- Kolon KOPA® KN135HB30HI Multi Reinforced Nylon 6
- LG Chemical XR404 ABS, Heat Resistance
- SABIC Innovative Plastics LNP LUBRILOY U2000A PPA (Asia Pacific)
- Dow H700-12 Polypropylene Homopolymer Resin
Copyright © lookpolymers.com All Rights Reserved