- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Shin-Etsu Silicones LIMSâ„¢ KE2001-40A/B Elastomer
Shin-Etsu Silicones LIMSâ„¢ KE2001-40A/B Elastomer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Shin-Etsu Silicones |
| Trade Name | LIMS™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Shin-Etsu Silicones LIMSâ„¢ KE2001-40A/B Elastomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information Provided by Shin-Etsu Silicones of America, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.12 g/cc | 1.12 g/cc | |
| Viscosity | 400000 cP | 400000 cP | A |
| 400000 cP | 400000 cP | B | |
| Linear Mold Shrinkage | 0.022 cm/cm | 0.022 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 40 | 40 | |
| Tensile Strength | 9.20 MPa | 1330 psi | |
| Elongation at Yield | 600 % | 600 % | |
| 100% Modulus | 0.00109 GPa | 0.158 ksi | |
| Tear Strength | 42.0 kN/m | 240 pli | |
| Compression Set | 5.0 % @Temperature 200 °C, Time 14400 sec |
5.0 % @Temperature 392 °F, Time 4.00 hour |
|
| 40 % @Temperature 150 °C, Time 3600 sec |
40 % @Temperature 302 °F, Time 1.00 hour |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 5.00 min @Temperature 120 °C |
0.0833 hour @Temperature 248 °F |
Press Cure |
| 60.0 min @Temperature 150 °C |
1.00 hour @Temperature 302 °F |
Post Cure |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | Translucent | |
| Cure Rate | 20 | T10 (302°F, ODR) |
| 29 | T90 (302°F, ODR) |
Users viewing this material also viewed the following:
- Polymax® Maxelast® P1985T TPE, PP Overmold or Standalone use
- Polimeri Europa Sinkral® F 332 ABS Resin
- Fainplast Compounds RH 211/W Rigid PVC, Antishock Extrusion
- Lehmann & Voss LUVOCOM® 3/CF/12/EG Polyamide 6, with carbon fiber, high viscosity
- Indium Corp. Indalloy 221 Silver Solder Alloy
- Multibase Multi-Flex® A 6041 Clear TPE Thermoplastic Elastomer
- Total PSI 3441 High Heat Resistance Impact Polystyrene
- Esstech X-829-7100 PMGDM, 50% (w/w) Solution in Triethyleneglycol Dimethacrylate, C32H34O16
- ATI Wah Chang 425™ Titanium Alloy, Hot Rolled & Annealed Plate
- Zircar Zirconia ZYF-50 Zirconia Felt Insulation
Copyright © lookpolymers.com All Rights Reserved