- HOME
- POLYMER SEARCH
- Ferrous Metal
- Alloy Steel
- Low Alloy Steel
- SSAB Tunnplat Domex® 550MC HSLA Steel
SSAB Tunnplat Domex® 550MC HSLA Steel
| Category | Metal , Ferrous Metal , Alloy Steel , Low Alloy Steel |
| Manufacturer | SSAB Tunnplat AB |
| Trade Name | Domex® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | SSAB Tunnplat Domex® 550MC HSLA Steel.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
HSLA SteelCharacteristics: Domex® MC grade steels conform to the provisions of EN 10149-2 standard and often have better properties.Property data is for hot-rolled steel..Domex® is the brand name of hot rolled products from SSAB Tunnplat. Domex® cold-forming steels are modern structural steels. General use of Domex® high strength steels offers a number of benefits compared to ordinary structural steels: Lower weight, Simpler production, Lower creep rate, Longer useful life, Higher load-bearing capacity, Lower transport costs, Reduced stocks, Lower overall cost.Data provided by SSAB Tunnplat.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 7.87 g/cc | 0.284 lb/in³ | Estimated by MatWeb |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 600 - 760 MPa | 87000 - 110000 psi | |
| Tensile Strength, Yield | >= 550 MPa | >= 79800 psi | |
| Elongation at Break | >= 14 % @Thickness <=3.00 mm |
>= 14 % @Thickness <=0.118 in |
A<sub>80</sub> |
| >= 17 % @Thickness >=3.00 mm |
>= 17 % @Thickness >=0.118 in |
A<sub>5</sub> | |
| Bend Radius, Minimum | >= 1.0 t | >= 1.0 t | t<3mm; internal bend radius, 90° |
| >= 1.2 t | >= 1.2 t | 3 mm < t< 6mm; internal bend radius, 90° | |
| >= 1.8 t | >= 1.8 t | t>6mm; internal bend radius, 90° |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Aluminum, Al | >= 0.015 % | >= 0.015 % | |
| Carbon, C | <= 0.12 % | <= 0.12 % | |
| Iron, Fe | 97 % | 97 % | As remainder |
| Manganese, Mn | <= 1.8 % | <= 1.8 % | |
| Niobium, Nb (Columbium, Cb) | <= 0.090 % | <= 0.090 % | |
| Phosphorous, P | <= 0.025 % | <= 0.025 % | |
| Silicon, Si | <= 0.30 % | <= 0.30 % | |
| Sulfur, S | <= 0.010 % | <= 0.010 % | |
| Titanium, Ti | <= 0.15 % | <= 0.15 % | |
| Vanadium, V | <= 0.20 % | <= 0.20 % |
Users viewing this material also viewed the following:
- Multibase TPSiV™ 3010-60A Thermoplastic Silicone Vulcanizate
- Osprey Metals M2/MA Tool Steel Master Alloy Powder (Grade 95% - 16)
- Kazanorgsintez 102-273 Thermostabilized Low Density Polyethylene Composition for Radiation Modification
- Greene Tweed CHEMRAZ® 653 Perfluoroelastomer
- Saint-Gobain Chemlam® RL® RL1000 PTFE-Coated Polyester/Cotton Blend Reinforced Laminate
- DSM Novamid® 2420A PA666
- ExxonMobil Exxtral™ LNU 011 Performance Polyolefin
- ExxonMobil Mobil Delvac 80W-140 Synthetic Gear Oil
- 3M 4314 Single-Coated Foam Tape
Copyright © lookpolymers.com All Rights Reserved