- HOME
- POLYMER SEARCH
- Ferrous Metal
- Alloy Steel
- Low Alloy Steel
- SSAB Tunnplat Docol® 1000 DL High-strength Steel
SSAB Tunnplat Docol® 1000 DL High-strength Steel
| Category | Metal , Ferrous Metal , Alloy Steel , Low Alloy Steel |
| Manufacturer | SSAB Tunnplat AB |
| Trade Name | Docol® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | SSAB Tunnplat Docol® 1000 DL High-strength Steel.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
In course of development.Data provided by SSAB Tunnplat.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 7.87 g/cc | 0.284 lb/in³ | Estimated by MatWeb |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 1000 - 1200 MPa | 145000 - 174000 psi | |
| Tensile Strength, Yield | >= 650 MPa | >= 94300 psi | After bake hardening |
| 500 - 750 MPa @Strain 0.200 % |
72500 - 109000 psi @Strain 0.200 % |
||
| Elongation at Break | >= 8.0 % | >= 8.0 % | A<sub>80</sub> |
| Bend Radius, Minimum | >= 3.0 t | >= 3.0 t | 90° bend |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Aluminum, Al | 0.040 % | 0.040 % | |
| Carbon, C | 0.18 % | 0.18 % | |
| Iron, Fe | 98 % | 98 % | As remainder |
| Manganese, Mn | 1.6 % | 1.6 % | |
| Phosphorous, P | 0.015 % | 0.015 % | |
| Silicon, Si | 0.20 % | 0.20 % | |
| Sulfur, S | 0.0020 % | 0.0020 % |
Users viewing this material also viewed the following:
- Omya OMYACARB® 40 - LU Calcium Carbonate
- Michelman® Michem® Coat 40EAF Water resistant, gluable coating with good grease resistance
- SABIC Innovative Plastics NORYL V090 PPE+HIPS (Europe-Africa-Middle East)
- DuPont Elvax® 3165 Ethylene-Vinyl Acetate Copolymer Resin for Coextrusion, Blown Film
- China Tungsten YW2 Tungsten Carbide for Cutting Tools
- Arlon 910-07RXX-P0 0.010" (0.254 mm) Self-Fusing Silicone Tape
- ATI Allegheny Ludlum Type 332 Stainless Steel, UNS N08800
- Ashley Polymers Ashlene® 73M Nylon 6, Mineral Reinforced
- Ametek Tungsten-Copper Composites AWC 8020
Copyright © lookpolymers.com All Rights Reserved