Resinlab® EP950NMF Gray Non-Metallic Filled Rubber Modified Epoxy

Category	Polymer , Adhesive , Thermoset , Epoxy , Epoxy Adhesive
Manufacturer	Resinlab®
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Resinlab® EP950NMF Gray Non-Metallic Filled Rubber Modified Epoxy.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Resinlab™ EP950NMF Gray is a non-metallic filled version of EP950G. It is a one-part rubber modified epoxy designed for bonding metal and other structural material subject to stress at elevated temperature. It has a medium paste like viscosity, which gives minimal sag upon cure at elevated temperature. Being a 100% solids, single component product a variety of simple, low cost dispensing methods are available for application of this product. This product will cure at temperatures as low as 113°C (235°F) without sacrificing shelf life or need for unusual shipping or storage considerations.Information Provided by Resinlab L.L.C., an Ellsworth Adhesives Company.

Physical Properties	Metric	English	Comments
Specific Gravity	1.40 g/cc	1.40 g/cc	TM R050-16
Water Absorption	2.08 % @Time 86400 sec	2.08 % @Time 24.0 hour	TM R050-35
Viscosity	750000 cP	750000 cP	RVT, #7, 2.5 rpm; TM R050-12

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	65	65	TM R050-17
Tensile Strength at Break	37.9 MPa	5500 psi	TM R050-36
Tensile Strength, Ultimate	37.9 MPa	5500 psi	TM R050-36
Tensile Strength, Yield	17.2 MPa	2500 psi	TM R050-36
Elongation at Break	1.0 - 2.0 %	1.0 - 2.0 %	TM R050-36
Tensile Modulus	4.14 GPa	600 ksi	TM R050-36
Adhesive Bond Strength	17.2 MPa	2500 psi	Lap shear; 2024 T3 Al Abraded / MEK Wipe; TM R050-37
Peel Strength	0.877 - 1.23 kN/m	5.00 - 7.00 pli

Thermal Properties	Metric	English	Comments
CTE, linear	130 µm/m-°C	72.2 µin/in-°F
Thermal Conductivity	0.210 W/m-K	1.46 BTU-in/hr-ft²-°F
Maximum Service Temperature, Air	175 °C	347 °F
Minimum Service Temperature, Air	-40.0 °C	-40.0 °F
Glass Transition Temp, Tg	123 °C	253 °F	TM R050-25

Electrical Properties	Metric	English
Volume Resistivity	8.00e+12 ohm-cm	8.00e+12 ohm-cm
Dielectric Constant	4.5 @Frequency 100 Hz, Temperature 25.0 °C	4.5 @Frequency 100 Hz, Temperature 77.0 °F
Dielectric Strength	16.1 kV/mm	410 kV/in

Processing Properties	Metric	English
Cure Time	20.0 min @Temperature 177 °C	0.333 hour @Temperature 351 °F
	40.0 min @Temperature 150 °C	0.667 hour @Temperature 302 °F
	45.0 min @Temperature 135 °C	0.750 hour @Temperature 275 °F
	150 min @Temperature 121 °C	2.50 hour @Temperature 250 °F

Descriptive Properties	Value	Comments
Color	Gray
Pot Life (Months)	3	at 25°C, Mass: 100g
	6	at <10°C, Mass: 100g

Users viewing this material also viewed the following: