- HOME
- POLYMER SEARCH
- Thermoplastic
- Acetal (POM)
- Acetal Copolymer, Unreinforced
- Quadrant EPP Semitron® ESd 225, Extruded, Static Dissipative Acetal (ASTM Product Data Sheet)
Quadrant EPP Semitron® ESd 225, Extruded, Static Dissipative Acetal (ASTM Product Data Sheet)
| Category | Polymer , Thermoplastic , Acetal (POM) , Acetal Copolymer, Unreinforced |
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Semitron® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Semitron® ESd 225, Extruded, Static Dissipative Acetal (ASTM Product Data Sheet).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.33 g/cc | 1.33 g/cc | ASTM D792 |
| Water Absorption | 2.0 % | 2.0 % | Immersion, 24hr; ASTM D570(2) |
| Water Absorption at Saturation | 8.0 % | 8.0 % | Immersion; ASTM D570(2) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 50 | 50 | ASTM D785 |
| Hardness, Rockwell R | 108 | 108 | ASTM D785 |
| Hardness, Shore D | 76 | 76 | ASTM D2240 |
| Tensile Strength | 37.2 MPa | 5400 psi | ASTM D638 |
| Elongation at Break | 15 % | 15 % | ASTM D638 |
| Tensile Modulus | 1.38 GPa | 200 ksi | ASTM D638 |
| Flexural Strength | 50.3 MPa | 7300 psi | ASTM D790 |
| Flexural Modulus | 1.52 GPa | 220 ksi | ASTM D790 |
| Compressive Strength | 55.2 MPa | 8000 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 1.21 GPa | 175 ksi | ASTM D695 |
| Shear Strength | 41.4 MPa | 6000 psi | ASTM D732 |
| Izod Impact, Notched | 0.801 J/cm | 1.50 ft-lb/in | ASTM D256 Type A |
| Coefficient of Friction, Dynamic | 0.29 | 0.29 | Dry vs. Steel; QTM55007 |
| K (wear) Factor | 60.4 x 10-8 mm³/N-M | 30.0 x 10-10 in³-min/ft-lb-hr | QTM 55010 |
| Limiting Pressure Velocity | 0.0701 MPa-m/sec | 2000 psi-ft/min | 4:1 safety factor; QTM 55007 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 167 µm/m-°C @Temperature -40.0 - 149 °C |
93.0 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
| Melting Point | 160 °C | 320 °F | Crystalline, Peak; ASTM D3418 |
| Maximum Service Temperature, Air | 82.2 °C | 180 °F | Long Term |
| Deflection Temperature at 1.8 MPa (264 psi) | 107 °C | 225 °F | ASTM D648 |
| Flammability, UL94 | HB | HB | 1/8 inch (Estimated Rating) |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | 1.00e+9 - 1.00e+10 ohm | 1.00e+9 - 1.00e+10 ohm | EOS/ESD S11.11 |
| Dielectric Constant | 4.31 @Frequency 1e+6 Hz |
4.31 @Frequency 1e+6 Hz |
ASTM D150 |
| Dissipation Factor | 0.036 @Frequency 1e+6 Hz |
0.036 @Frequency 1e+6 Hz |
ASTM D150 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | No | No | |
| Canada AG | No | No | |
| FDA | No | No | |
| NSF | No | No | |
| USDA | No | No | |
| USP Class VI | No | No |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Unacceptable | Unacceptable | |
| Acids, Weak | Limited | Limited | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Acceptable | Acceptable | |
| Chlorinated Solvents | Limited | Limited | |
| Conductive / Static Dissipative | Yes | Yes | |
| Continuous Sunlight | Limited | Limited | |
| Hot Water / Steam | Limited | Limited | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Machinability | 1 | 1-10, 1=Easier to Machine |
Users viewing this material also viewed the following:
- Polymax® Maxelast® P3975H TPE, PP Overmold or Standalone use
- SABIC Innovative Plastics Lexan® HPM1914 PC Copolymer
- LyondellBasell Petrothene® GA837091 Medium Density Polyethylene (Unverified Data**)
- Lehmann & Voss LUVOCOM® 1-8520 Polyamide 66, with carbon fiber, toughness-modified
- SPS Guang Zhou REMASâ„¢ 6001RM10 Flame-retarded PE masterbatch
- Saint-Gobain CHR® SG56-06(R) Anti-Static Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape
- Samsung Cheil Industries Starex® NT-7310 ABS, Unreinforced FR
- Skamol Group SUPER ISOL Calcium Silicate Insulating Slab
- ConocoPhillips Hydroclear® 220 TCS Slideway lubricant
- Eurotec® Tecopet® PT74 GR30 BK002 DA PET, 30% glass fiber reinforced, high heat stabilized, black
Copyright © lookpolymers.com All Rights Reserved