- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyetherimide (PEI)
- Quadrant EPP Semitron® 420 ESd V (ASTM Product Data Sheet)
Quadrant EPP Semitron® 420 ESd V (ASTM Product Data Sheet)
| Category | Polymer , Thermoplastic , Polyetherimide (PEI) |
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Semitron® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Semitron® 420 ESd V (ASTM Product Data Sheet).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.51 g/cc | 1.51 g/cc | ASTM D792 |
| Water Absorption | 0.21 % | 0.21 % | Immersion, 24hr; ASTM D570(2) |
| Water Absorption at Saturation | 1.4 % | 1.4 % | Immersion; ASTM D570(2) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell E | 78 | 78 | ASTM D785 |
| Hardness, Rockwell M | 110 | 110 | ASTM D785 |
| Tensile Strength | 68.9 MPa | 10000 psi | ASTM D638 |
| Elongation at Break | 1.5 % | 1.5 % | ASTM D638 |
| Tensile Modulus | 6.27 GPa | 910 ksi | ASTM D638 |
| Flexural Strength | 109 MPa | 15800 psi | ASTM D790 |
| Flexural Modulus | 6.27 GPa | 910 ksi | ASTM D790 |
| Compressive Strength | 154 MPa | 22300 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 3.76 GPa | 545 ksi | ASTM D695 |
| Izod Impact, Notched | 0.267 J/cm | 0.500 ft-lb/in | ASTM D256 Type A |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 27.0 µm/m-°C @Temperature -40.0 - 149 °C |
15.0 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
| Maximum Service Temperature, Air | 171 °C | 340 °F | Long Term |
| Deflection Temperature at 1.8 MPa (264 psi) | 216 °C | 420 °F | ASTM D648 |
| Glass Transition Temp, Tg | 216 °C | 420 °F | ASTM D3418 |
| Flammability, UL94 | V-0 | V-0 | 1/8 inch (Estimated Rating) |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | 1.00e+6 - 1.00e+9 ohm | 1.00e+6 - 1.00e+9 ohm | EOS/ESD S11.11 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | No | No | |
| Canada AG | No | No | |
| FDA | No | No | |
| NSF | No | No | |
| USDA | No | No | |
| USP Class VI | No | No |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Unacceptable | Unacceptable | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Acceptable | Acceptable | |
| Chlorinated Solvents | Unacceptable | Unacceptable | |
| Conductive / Static Dissipative | Yes | Yes | |
| Continuous Sunlight | Acceptable | Acceptable | |
| Hot Water / Steam | Acceptable | Acceptable | |
| Hydrocarbons - Aliphatic | Limited | Limited | |
| Hydrocarbons - Aromatic | Unacceptable | Unacceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Unacceptable | Unacceptable |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Machinability | 4 | 1-10, 1=Easier to Machine |
Users viewing this material also viewed the following:
- PlastiComp Velocity® LGF60-PA6 High Flow Nylon 6, 60% Long Glass Fiber
- NanoAmor 60%, OD: 1-2 nm OH Functionalized Single-Walled Carbon Nanotubes
- LG Chemical LUMAX HF-5008 High Flow PBT, Dimensional Stability
- Gouda Vuurvast CURON 145 P Dense Refractory Castable
- SABIC Innovative Plastics LNP THERMOCOMP UCF26AS PPA
- UBE UBEPOL VCR412 Synthetic Rubber (Raw Polymer)
- Vyncolit X613 Novolac Phenolic
- ExxonMobil Exxon™ 68 High Mooney Grade
- Crucible Steel CPM® Rex M4 HC(HS) Tool Steel
Copyright © lookpolymers.com All Rights Reserved