- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PTFE
- Polytetrafluoroethylene (PTFE), Molded
- Quadrant EPP Fluorosint® MT-01 Enhanced PTFE (ASTM Product Data Sheet) (Unverified Data**)
Quadrant EPP Fluorosint® MT-01 Enhanced PTFE (ASTM Product Data Sheet) (Unverified Data**)
| Category | Polymer , Thermoplastic , Fluoropolymer , PTFE , Polytetrafluoroethylene (PTFE), Molded |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Fluorosint® MT-01 Enhanced PTFE (ASTM Product Data Sheet)
(Unverified Data**).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 2.27 g/cc | 2.27 g/cc | ASTM D792 |
| Water Absorption | 0.10 % | 0.10 % | Immersion, 24hr; ASTM D570(2) |
| Deformation | 0.20 % | 0.20 % | 2000 psi; 122°F (50°C) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 74 | 74 | ASTM D785 |
| Tensile Strength | 14.5 MPa | 2100 psi | ASTM D638 |
| Elongation at Break | 40 % | 40 % | ASTM D638 |
| Tensile Modulus | 2.25 GPa | 326 ksi | ASTM D638 |
| Flexural Strength | 27.6 MPa | 4000 psi | ASTM D790 |
| Flexural Modulus | 3.34 GPa | 485 ksi | ASTM D790 |
| Compressive Strength | 23.4 MPa | 3400 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 1.72 GPa | 250 ksi | ASTM D695 |
| Shear Strength | 17.9 MPa | 2600 psi | ASTM D732 |
| Coefficient of Friction, Dynamic | 0.18 | 0.18 | dry vs. steel; QTM55007 |
| K (wear) Factor | 403 x 10-8 mm³/N-M | 200 x 10-10 in³-min/ft-lb-hr | QTM55010 |
| Limiting Pressure Velocity | 0.158 MPa-m/sec | 4500 psi-ft/min | 4:1 safety factor applied; QTM 55010 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 54.0 µm/m-°C @Temperature -40.0 - 150 °C |
30.0 µin/in-°F @Temperature -40.0 - 302 °F |
ASTM E831 |
| Maximum Service Temperature, Air | 316 °C | 600 °F | Continuous |
| Deflection Temperature at 1.8 MPa (264 psi) | 93.3 °C | 200 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 3.17 mm |
V-0 @Thickness 0.125 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | <= 1.0e+6 ohm | <= 1.0e+6 ohm | ANSI/ESD STM 11.11 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | No | No | |
| Canada AG | No | No | |
| FDA | No | No | |
| NSF | No | No | |
| USDA | No | No | |
| USP Class VI | No | No |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Acceptable | Acceptable | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Acceptable | Acceptable | |
| Alkalies, Weak | Acceptable | Acceptable | |
| Chlorinated Solvents | Acceptable | Acceptable | |
| Conductive / Static Dissipative | No | No | |
| Continuous Sunlight | Acceptable | Acceptable | |
| Hot Water / Steam | Limited | Limited | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Machinability | 5 | 1-10, 1=Easier to Machine |
Users viewing this material also viewed the following:
- Polymer Resources PC-GP1-[color]-LF Polycarbonate, General Purpose, Food Contact
- Ineos Nova S-4600 High Impact Compact Polystyrene (discontinued **)
- LG Chemical LGflex EBNW Plasticizer
- Karina 740-DA-18/339-A-IS-BZ Gray PVC Compound
- Techmer ES HiFill® PPA GF33 HS L 33% Glass Filled
- TIMCAL TIMREX® FC800 Coke
- Azoty Tarnow™ Tarnamid® T-27 GF10 MX6 Polyamide 6 - Flame Retarded, Reinforced
- ArcelorMittal Usibor® 1500 Ultra high strength steel, Cold Rolled
- ExxonMobil Mobiltrans AST
- SABIC Innovative Plastics LNP Stat-kon MDM40 PP
Copyright © lookpolymers.com All Rights Reserved