- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyamide-imide (PAI)
- Polyamide-Imide, Glass Filled
- Quadrant EPP Duratron® PAI T5030 Polyamide-imide, glass reinforced, extruded (ASTM Product Data Sheet)
Quadrant EPP Duratron® PAI T5030 Polyamide-imide, glass reinforced, extruded (ASTM Product Data Sheet)
| Category | Polymer , Thermoplastic , Polyamide-imide (PAI) , Polyamide-Imide, Glass Filled |
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Duratron® PAI |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Duratron® PAI T5030 Polyamide-imide, glass reinforced, extruded (ASTM Product Data Sheet).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.60 g/cc | 1.60 g/cc | ASTM D792 |
| Water Absorption | 0.30 % | 0.30 % | Immersion, 24hr; ASTM D570(2) |
| Water Absorption at Saturation | 1.5 % | 1.5 % | Immersion; ASTM D570(2) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell E | 90 | 90 | ASTM D785 |
| Tensile Strength | 159 MPa | 23000 psi | ASTM D638 |
| Elongation at Break | 4.0 % | 4.0 % | ASTM D638 |
| Tensile Modulus | 6.89 GPa | 1000 ksi | ASTM D638 |
| Flexural Strength | 207 MPa | 30000 psi | ASTM D790 |
| Flexural Modulus | 6.76 GPa | 980 ksi | ASTM D790 |
| Compressive Strength | 276 MPa | 40000 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 4.83 GPa | 700 ksi | ASTM D695 |
| Izod Impact, Notched | 0.534 J/cm | 1.00 ft-lb/in | ASTM D256 Type A |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 16.2 µm/m-°C @Temperature -40.0 - 149 °C |
9.00 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
| Thermal Conductivity | 0.360 W/m-K | 2.50 BTU-in/hr-ft²-°F | ASTM F433 |
| Maximum Service Temperature, Air | 260 °C | 500 °F | Long Term |
| Deflection Temperature at 1.8 MPa (264 psi) | 277 °C | 530 °F | ASTM D648 |
| Glass Transition Temp, Tg | 275 °C | 527 °F | ASTM D3418 |
| Flammability, UL94 | V-0 | V-0 | 1/8 inch (Estimated Rating) |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | >= 1e+13 ohm | >= 1e+13 ohm | EOS/ESD S11.11 |
| Dielectric Strength | 27.6 kV/mm | 700 kV/in | Short Term; ASTM D149 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | No | No | |
| Canada AG | No | No | |
| FDA | No | No | |
| NSF | No | No | |
| USDA | No | No | |
| USP Class VI | No | No |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Limited | Limited | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Limited | Limited | |
| Chlorinated Solvents | Acceptable | Acceptable | |
| Conductive / Static Dissipative | No | No | |
| Continuous Sunlight | Acceptable | Acceptable | |
| Hot Water / Steam | Limited | Limited | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Machinability | 8 | 1-10, 1=Easier to Machine |
Users viewing this material also viewed the following:
- PolyOne Trilliant™ HC 5410-0030RS Natural Polyethylene, High Density (HDPE)
- MarkeTech WCu20 Tungsten Copper Alloy
- Solvay TECHNYL® C 442 Black V PA6, DRY
- Unitika E-RUNG60 Ultra high-rigidity PA6, Conditioned
- TIMCAL TIMREX® KS150 Primary Synthetic Graphite
- ExxonMobil Mobil Clean 10W-40 Motor Oil
- 3M BBI-A Shrinkable Tubing for Bus Bar
- 3M FM04190N White Polyester Label Products
- BASF Ultramid® 8233G HS BK-102 33% Glass Filled PA6 (Conditioned)
Copyright © lookpolymers.com All Rights Reserved