Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Quadrant EPP Armor-X™ Non-Marring, Elastomer Polymeric Blend (ASTM Product Data Sheet)

Category Polymer , Thermoplastic , Polyethylene (PE) , HDPE
Manufacturer Quadrant Engineering Plastics Products
Trade Name Armor-X™
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Quadrant EPP Armor-X™ Non-Marring, Elastomer Polymeric Blend (ASTM Product Data Sheet).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Physical Properties Metric English Comments
Specific Gravity 1.00 g/cc
1.00 g/cc
ASTM D792
Mechanical Properties Metric English Comments
Hardness, Shore D 50
50
ASTM D2240
Tensile Strength 22.1 MPa
3200 psi
ASTM D638
Elongation at Break 100 %
100 %
ASTM D638
Tensile Modulus 0.355 GPa
51.5 ksi
ASTM D638
Flexural Strength 15.2 MPa
2200 psi
ASTM D790
Flexural Modulus 0.303 GPa
44.0 ksi
ASTM D790
Compressive Strength 26.9 MPa
3900 psi
10% Def.; ASTM D695
Compressive Modulus 0.234 GPa
34.0 ksi
ASTM D695
Izod Impact, Notched NB
NB
ASTM D256 Type A
Coefficient of Friction, Dynamic 0.20
0.20
Dry vs. Steel; QTM55007
Limiting Pressure Velocity 0.0701 MPa-m/sec
2000 psi-ft/min
4:1 safety factor; QTM 55007
Thermal Properties Metric English Comments
Melting Point 135 °C
275 °F
Crystalline, Peak; ASTM D3418
Maximum Service Temperature, Air 82.2 °C
180 °F
Long Term
Deflection Temperature at 1.8 MPa (264 psi) 46.7 °C
116 °F
ASTM D648
Flammability, UL94 HB
HB
1/8 inch (Estimated Rating)
Electrical Properties Metric English Comments
Surface Resistivity per Square >= 1.00e+15 ohm
>= 1.00e+15 ohm
ASTM D257
Compliance Properties Metric English Comments
3A-Dairy No
No
Canada AG No
No
FDA No
No
NSF No
No
USDA No
No
USP Class VI No
No
Chemical Resistance Properties Metric English Comments
Acids, Strong (pH 1-3) Limited
Limited
Acids, Weak Acceptable
Acceptable
Alcohols Acceptable
Acceptable
Alkalies, Strong (pH 11-14) Acceptable
Acceptable
Alkalies, Weak Acceptable
Acceptable
Chlorinated Solvents Acceptable
Acceptable
Conductive / Static Dissipative No
No
Continuous Sunlight Limited
Limited
Hot Water / Steam Limited
Limited
Hydrocarbons - Aliphatic Acceptable
Acceptable
Hydrocarbons - Aromatic Unacceptable
Unacceptable
Inorganic Salt Solutions Acceptable
Acceptable
Ketones, Esters Limited
Limited
Descriptive Properties Value Comments
Machinability 3
1-10, 1=Easier to Machine
Copyright © lookpolymers.com All Rights Reserved