Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Process Technologies Inc Viton® Extreme™ Compound 2001 Sanitary Gasket/O-Ring

Category Polymer , Thermoset , Fluoropolymer, TS , Thermoset Fluoroelastomer , Rubber or Thermoset Elastomer (TSE)
Manufacturer Process Technologies Inc
Trade Name Viton® Extreme™
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Process Technologies Inc Viton® Extreme™ Compound 2001 Sanitary Gasket/O-Ring.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Process Technologies Viton® Extreme sanitary gaskets and O-Rings are produced from formulated Viton® Extreme ETP-600S fluoroelastomer. This unique material is produced with Advanced Polymer Architecture. (APA) It represents a proprietary advance in fluoroelastomer technology developed by DuPont Performance Elastomers. Viton Extreme sealing elements exhibit excellent resistance to steam and to attack by an exceptionally broad variety of chemicals and fluids. They can solve the most challenging chemical applications in the pharmaceutical and biotechnology industries. Sterilization processes used by pharmaceutical, biotechnology, food and beverage manufacturers frequently use steam or caustic chemicals or a combination of both. These aggressive conditions put special demands on commonly used sanitary gasket materials such as EPDM, silicone, PTFE and bisphenol-cured FKM. EPDM is capable of providing excellent steam resistance, but exhibits relatively poor resistance to some commonly used cleaning fluids. Seals made with silicone may provide good resistance to a wide variety of cleaning fluids, but have relatively poor steam resistance. PTFE seals offer excellent resistance to steam and chemical attack, but because of their plastic nature, can creep under stress. Bisphenol-cured FKM has good steam resistance but is less resistant to some caustic sterilization processes. Process Technologies offers its Viton Extreme compound 2001 in all sanitary gasket sizes for Tri-Clover® Tri-Clamp®Information provided by Process Technologies Inc
Mechanical Properties Metric English Comments
Hardness, Shore A 75
75
ASTM D2240
Tensile Strength at Break 15.96 MPa
2315 psi
ASTM D412
Elongation at Break 198 %
198 %
ASTM D412
100% Modulus 0.007439 GPa
1.079 ksi
ASTM D412
Compression Set 27 %

@Temperature 200 °C,
Time 252000 sec
27 %

@Temperature 392 °F,
Time 70.0 hour
25% Deflection, in Air % of original deflection; ASTM D395
Thermal Properties Metric English Comments
Maximum Service Temperature, Air 200 °C
392 °F
Minimum Service Temperature, Air -26.0 °C
-14.8 °F
Descriptive Properties Value Comments
Color Black
Compatibility for Chemicals Acetone
Good
Ammonia
Not Recommended
Hydrochloric Acid
Excellent
Hydrofluoric Acid
Limited
Hydrogen Peroxide
Excellent
Isopropyl Alcohol
Excellent
Nitric Acid
Excellent
Phosphoric Acid
Excellent
Sodium Hydroxide
Excellent
Sodium Hypochlorite
Excellent
Steam to 400ºF (204ºC)
Limited
Sulfuric Acid
Excellent
Copyright © lookpolymers.com All Rights Reserved