Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Precision Polymer Engineering Kemex™ V96E

Category Polymer , Thermoset , Fluoropolymer, TS , Thermoset Fluoroelastomer , Rubber or Thermoset Elastomer (TSE)
Manufacturer Precision Polymer Engineering Limited
Trade Name Kemex™
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Precision Polymer Engineering Kemex™ V96E.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Kemex™ ETP fluoroelastomer is a premium peroxide cured fluoroelastomer that exhibits improved fluid resistance over any FKM fluoroelastomer. It is designed for severe service applications, which require chemical resistance to strong bases and amines and good resistance to polar solvents. Kemex™ is based upon ETP terpolymer and is a new generation of fluoroelastomer consisting of ethylene, tetrafluoroethylene and perfluormethylvinylether. Kemex™ bridges the gap between fluoroelastomers, Aflas® and Perlast® perfluoroelastomer. It provides the best chemical resistance of all fluoroelastomers and is available in a wide range of compounds. Kemex™ was originally developed for use in oil field applications, in contact with amines and sour oils. However, due to its excellent chemical resistance properties it is now widely used in the CPI industry due to its suitability for use with fuels with additives, spray coatings, alcohols and solvents such as toluene, ETBE and MTBE.Applications: Kemex™ has been specially developed for severe applications that require a combination of heat, fluid and base resistance combined with low temperature flexibility. Applications which Kemex™ exhibits excellent resistance include: Aliphatic and aromatic hydrocarbons; Hydraulic Fluids; Motor Oils; Fuels and alcohol. Kemex™ also shows good resistance to base containing fluids and polar solvents.
Mechanical Properties Metric English Comments
Hardness, Shore A 91
91
°IRHD; ASTM D1415
92
92
°IRHD, +1 change after 72 hours @ 250°C; ASTM D1415
Tensile Strength, Yield 18.4 MPa
2670 psi
ASTM D412
18.584 MPa
2695.4 psi
1% change after 72 hours @ 250°C; ASTM D412
Elongation at Break 180 %
180 %
ASTM D412
Compression Set 20 %
20 %
ASTM D395
Thermal Properties Metric English Comments
Maximum Service Temperature, Air 206 °C
403 °F
Minimum Service Temperature, Air -20.0 °C
-4.00 °F
Copyright © lookpolymers.com All Rights Reserved