- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, 30% Glass Fiber Filled
- Polyram PlusTek PB825G5 Nylon 6, 25% Glass Fiber
Polyram PlusTek PB825G5 Nylon 6, 25% Glass Fiber
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 30% Glass Fiber Filled |
| Manufacturer | Polyram |
| Trade Name | PlusTek |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyram PlusTek PB825G5 Nylon 6, 25% Glass Fiber.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
25% glass fiber reinforced, impact modified polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.28 g/cc | 0.0462 lb/in³ | DIN 53479 |
| Water Absorption | 6.2 % | 6.2 % | DIN 53495 |
| Moisture Absorption at Equilibrium | 2.0 % | 2.0 % | 50%RH; DIN 53714 |
| Linear Mold Shrinkage | 0.0030 - 0.0040 cm/cm | 0.0030 - 0.0040 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 119 | 119 | ASTM-D785 |
| Tensile Strength, Yield | 110 MPa | 16000 psi | ASTM-D638 |
| Elongation at Break | 3.0 % | 3.0 % | ASTM-D638 |
| Flexural Strength | 115 MPa | 16700 psi | ASTM D790 |
| Flexural Modulus | 5.50 GPa | 798 ksi | ASTM-D790 |
| Izod Impact, Notched | 1.25 J/cm @Temperature 23.0 °C |
2.34 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 218 °C | 424 °F | |
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | Continuous Use |
| 200 °C | 392 °F | Short peaks operation | |
| Deflection Temperature at 0.46 MPa (66 psi) | 210 °C | 410 °F | DIN 53461 |
| Deflection Temperature at 1.8 MPa (264 psi) | 195 °C | 383 °F | DIN 53461 |
| Flammability, UL94 | HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | DIN 53482 |
| Surface Resistance | 1.00e+10 ohm | 1.00e+10 ohm | DIN 53482 |
| Dielectric Constant | 6.6 @Frequency 1e+6 Hz |
6.6 @Frequency 1e+6 Hz |
VDE 0303/4 |
| Dielectric Strength | 70.0 kV/mm | 1780 kV/in | VDE 0303/4 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Lexan® ML7667 PC Copolymer (Asia Pacific)
- LyondellBasell Petrothene® NA860008 Low Density Polyethylene
- Special Metals INCONEL® 625LCF® Nickel Superalloy (UNS N06626) Annealed 2150°F (1180°C) + Aged 1400°F (760°C)
- Eurotec® Tecomid® NA40 GR40 NL RM PA6.6, 40% glass fiber reinforced, MoS2 modified, natural
- Asahi Kasei Xyron® 400H Modified Polyphenylene Ether
- BASF Ultrason E 2010 G6 30% Glass Filled PES
Copyright © lookpolymers.com All Rights Reserved