Polymer Resources PPX/NY G30 PPO/Nylon 66 Alloy , 30% Glass Reinforced

Category	Polymer , Thermoplastic , Nylon , Polyphenylene Ether/PPO
Manufacturer	Polymer Resources, LTD
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Polymer Resources PPX/NY G30 PPO/Nylon 66 Alloy , 30% Glass Reinforced.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Polyphenylene Oxide/Nylon 66 Alloy , 30% Glass ReinforcedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by Polymer Resources Corporation.

Physical Properties	Metric	English	Comments
Specific Gravity	1.33 g/cc	1.33 g/cc	ASTM D792
Linear Mold Shrinkage	0.0040 - 0.0070 cm/cm	0.0040 - 0.0070 in/in	ASTM D955
Melt Flow	1.0 - 4.0 g/10 min @Load 3.80 kg, Temperature 300 °C	1.0 - 4.0 g/10 min @Load 8.38 lb, Temperature 572 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	148 MPa	21500 psi	ASTM D638
Tensile Strength, Yield	148 MPa	21500 psi	ASTM D638
Flexural Strength	221 MPa	32000 psi	ASTM D790
Flexural Modulus	8.14 GPa	1180 ksi	ASTM D790
Izod Impact, Notched	0.481 J/cm @Temperature 22.8 °C	0.900 ft-lb/in @Temperature 73.0 °F	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	227 °C	440 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	232 °C	450 °F	ASTM D648
Flammability, UL94	HB @Thickness 1.59 mm	HB @Thickness 0.0626 in
	HB @Thickness 3.17 mm	HB @Thickness 0.125 in

Processing Properties	Metric	English
Rear Barrel Temperature	268 - 302 °C	515 - 575 °F
Middle Barrel Temperature	274 - 302 °C	525 - 575 °F
Front Barrel Temperature	279 - 302 °C	535 - 575 °F
Melt Temperature	279 - 304 °C	535 - 580 °F
Mold Temperature	79.4 - 121 °C	175 - 250 °F
Drying Temperature	93.3 - 107 °C	200 - 225 °F
Dry Time	3.00 - 4.00 hour	3.00 - 4.00 hour

Descriptive Properties	Value	Comments
Vent	0.001

Users viewing this material also viewed the following: