PolyOne OnFlex™ S KA 80A-3S1770 Thermoplastic Elastomer (TPE)

Category	Polymer , Thermoplastic , Elastomer, TPE
Manufacturer	PolyOne Corporation
Trade Name	OnFlex™
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	PolyOne OnFlex™ S KA 80A-3S1770 Thermoplastic Elastomer (TPE).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

OnFlex™-S KA thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are specially compatabilized to provide excellent adhesion to polyamide polymers including PA6, PA6.6, PA11 and PA12. OnFlex™-S KA can be processed by 2K molding or overmolding, insert molding or co-extrusion. In addition to this, OnFlex™-S KA compounds are formulated to provide excellent compression set performance, even at elevated temperatures, a wide hardness range, good colourability and surface appearance, good mechanical properties and excellent UV resistance.Properties are measured using injection molded plaques.Information provided by PolyOne

Physical Properties	Metric	English	Comments
Density	1.10 g/cc	0.0397 lb/in³	ISO 1183

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	80	80	ISO 868
Tensile Strength at Break	7.50 MPa	1090 psi	ISO 37
Tensile Stress	3.90 MPa @Strain 100 %	566 psi @Strain 100 %	ISO 37
	6.10 MPa @Strain 300 %	885 psi @Strain 300 %	ISO 37
Elongation at Break	500 %	500 %	ISO 37
Tear Strength	46.0 kN/m	262 pli	ISO 34-1
Compression Set	23 % @Temperature 23.0 °C, Time 259000 sec	23 % @Temperature 73.4 °F, Time 72.0 hour	ISO 815
	38 % @Temperature 70.0 °C, Time 79200 sec	38 % @Temperature 158 °F, Time 22.0 hour	ISO 815
	54 % @Temperature 100 °C, Time 79200 sec	54 % @Temperature 212 °F, Time 22.0 hour	ISO 815

Processing Properties	Metric	English
Melt Temperature	200 - 260 °C	392 - 500 °F
Mold Temperature	30.0 - 50.0 °C	86.0 - 122 °F
Drying Temperature	100 °C	212 °F
Dry Time	2.00 hour	2.00 hour

Descriptive Properties	Value	Comments
Features	Good Adhesion
	Good UV Resistance
	High Heat Resistance
Forms	Pellets
Generic Material	TPE
Generic Material Type	Styrenic Thermoplastic Elastomer (TES)
Generic Name	Thermoplastic Elastomer (TPE)
Injection Rate	Moderate
Manufacturer / Supplier	GLS Thermoplastic Elastomers
Processing Method	Coextrusion
	Multi Injection Molding
Regional Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
RoHS Compliance	RoHS Compliant
Uses	Automotive Applications
	Consumer Applications
	Industrial Applications
	Overmolding
	Power/Other Tools

Users viewing this material also viewed the following: