- HOME
- POLYMER SEARCH
- Thermoplastic
- Vinyl (PVC)
- PVC, Rigid Grade
- PolyOne Geon™ Vinyl Rigid Extrusion L8761 Polyvinyl Chloride, Rigid (PVC, Rigid)
PolyOne Geon™ Vinyl Rigid Extrusion L8761 Polyvinyl Chloride, Rigid (PVC, Rigid)
| Category | Polymer , Thermoplastic , Vinyl (PVC) , PVC, Rigid Grade |
| Manufacturer | PolyOne Corporation |
| Trade Name | Geon™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PolyOne Geon™ Vinyl Rigid Extrusion L8761 Polyvinyl Chloride, Rigid (PVC, Rigid).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Note: NSF listings are obtained on specific colors. Contact PolyOne for the latest listing of approved colors for this product.Information provided by PolyOne
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.38 g/cc | 1.38 g/cc | ASTM D792 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 77 | 77 | 15 sec; ASTM D2240 |
| Tensile Strength, Yield | 55.4 MPa | 8040 psi | Type I, 5.1 mm/min; ASTM D638 |
| Tensile Modulus | 3.06 GPa | 444 ksi | Type I, 5.1 mm/min; ASTM D638 |
| Flexural Strength | 98.6 MPa | 14300 psi | ASTM D790 |
| Flexural Modulus | 3.42 GPa | 496 ksi | ASTM D790 |
| Izod Impact, Notched | 0.480 J/cm @Thickness 3.18 mm, Temperature 23.0 °C |
0.899 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F |
Compression Molded, Across Flow; ASTM D256A |
| 0.480 J/cm @Thickness 3.18 mm, Temperature 23.0 °C |
0.899 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F |
Compression Molded, Flow; ASTM D256A | |
| Dart Drop Total Energy | 63.6 J/cm @Temperature 23.0 °C |
0.119 ft-lb/mil @Temperature 73.4 °F |
Procedure A, C.125; ASTM D4226 |
| 63.6 J/cm @Temperature 23.0 °C |
0.119 ft-lb/mil @Temperature 73.4 °F |
Procedure B, C.125; ASTM D4226 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 59.0 µm/m-°C | 32.8 µin/in-°F | ASTM D696 |
| Deflection Temperature at 1.8 MPa (264 psi) | 71.7 °C @Thickness 3.18 mm |
161 °F @Thickness 0.125 in |
Unannealed; ASTM D648 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 182 - 193 °C | 360 - 379 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Agency Ratings | NSF 14 | |
| NSF 61 | ||
| NSF Type I | ||
| Ease of Sizing | Good | |
| Features | Good Chemical Resistance | |
| Forms | Pellets | |
| Generic Material | PVC, Rigid | |
| Generic Name | Polyvinyl Chloride, Rigid (PVC, Rigid) | |
| Processing Method | Extrusion | |
| PVC Cell Classification | 12564 | ASTM D1784 |
| Regional Availability | Africa & Middle East | |
| Asia Pacific | ||
| Europe | ||
| North America | ||
| South America | ||
| Uses | Rods |
Users viewing this material also viewed the following:
- Okulen® 1000 PE-UHMW, Black
- ND Industries 388 Toughened Instant Superglue
- Polykemi AB POLYshine PBT D201 GF30 PBT, Glass Fiber Reinforced
- Overview of materials for Polypropylene, Molded
- SABIC Innovative Plastics LNP LUBRICOMP DFI14 PC
- Möller Medical NanoSkin KL-VP NanoCoating
- Sekisui PIOCELAN OP-30DB Moldable Polymer Foam
- ATG s.r.l. HNBR Hydrogenated Nitrile Butadiene Rubber
- 3M 4104 Single-Coated Foam Tape
- TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with 20 PHR N550 (FEF) Filler
Copyright © lookpolymers.com All Rights Reserved