- HOME
- POLYMER SEARCH
- Thermoplastic
- Vinyl (PVC)
- PolyOne Geon™ Vinyl Flexible B65T0 Polyvinyl Chloride, Flexible (PVC, Flexible)
PolyOne Geon™ Vinyl Flexible B65T0 Polyvinyl Chloride, Flexible (PVC, Flexible)
| Category | Polymer , Thermoplastic , Vinyl (PVC) |
| Manufacturer | PolyOne Corporation |
| Trade Name | Geon™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PolyOne Geon™ Vinyl Flexible B65T0 Polyvinyl Chloride, Flexible (PVC, Flexible).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by PolyOne
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.22 g/cc | 1.22 g/cc | ASTM D792 |
| Linear Mold Shrinkage, Flow | 0.019 - 0.023 cm/cm | 0.019 - 0.023 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 61 | 61 | 15 sec; ASTM D2240 |
| 65 | 65 | ASTM D2240 | |
| Tensile Strength at Break | 9.31 MPa | 1350 psi | 510 mm/min; ASTM D638 |
| Tensile Strength | 3.45 MPa @Strain 100 % |
500 psi @Strain 100 % |
510 mm/min; ASTM D638 |
| Elongation at Break | 460 % | 460 % | 510 mm/min; ASTM D638 |
| Tear Strength | 29.8 kN/m | 170 pli | Die C, 510 mm/min; ASTM D624 |
| Compression Set | 30 % @Temperature 23.0 °C, Time 79200 sec |
30 % @Temperature 73.4 °F, Time 22.0 hour |
ASTM D395 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Brittleness Temperature | -53.9 °C | -65.0 °F | ASTM D746 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 168 - 174 °C | 334 - 345 °F | |
| 188 - 199 °C | 370 - 390 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Features | Medium Gloss | |
| Forms | Pellets | |
| Generic Material | PVC, Flexible | |
| Generic Name | Polyvinyl Chloride, Flexible (PVC, Flexible) | |
| Processing Method | Extrusion | |
| Injection Molding | ||
| Regional Availability | Africa & Middle East | |
| Asia Pacific | ||
| Europe | ||
| North America | ||
| South America |
Users viewing this material also viewed the following:
- Nilit FRIANYL B63 SG 10 Nylon 6 for injection molding, 10% mineral filled
- Kraton® D4150 K (SBS) Linear Block Copolymer
- Karina 650D08/244-D-IS Beige PVC Compound
- Sharadaa Ceramics 26 Insulation Bricks-ASTM
- Plenco 4304 Phenolic, Nodular, Transfer Molded
- ChevronTexaco MCP Grease L NLGI Grade 00
- EMS-Grivory Grivory® TSG-30/4 FA PA666-GF30
- ExxonMobil LLDPE LL 1002YB Cast Linear Low Density Polyethylene Resin
- BASF Elastollan® S60D Polyester Type Polyurethane Elastomer
Copyright © lookpolymers.com All Rights Reserved