- HOME
- POLYMER SEARCH
- Thermoplastic
- Vinyl (PVC)
- PVC, Rigid Grade
- PolyOne Geon™ 81530 Polyvinyl Chloride, Rigid (PVC, Rigid)
PolyOne Geon™ 81530 Polyvinyl Chloride, Rigid (PVC, Rigid)
| Category | Polymer , Thermoplastic , Vinyl (PVC) , PVC, Rigid Grade |
| Manufacturer | PolyOne Corporation |
| Trade Name | Geon™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PolyOne Geon™ 81530 Polyvinyl Chloride, Rigid (PVC, Rigid).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by PolyOne
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.62 g/cc | 1.62 g/cc | ASTM D792 |
| Spiral Flow | 63.5 cm | 25.0 in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 88 | 88 | ASTM D2240 |
| Tensile Strength, Yield | 103 MPa | 14900 psi | Type I, 51 mm/min; ASTM D638 |
| Elongation at Break | 2.0 % | 2.0 % | Type I, 51 mm/min; ASTM D638 |
| Tensile Modulus | 9.65 GPa | 1400 ksi | Type I, 51 mm/min; ASTM D638 |
| Flexural Strength | 159 MPa | 23100 psi | ASTM D790 |
| Flexural Modulus | 9.31 GPa | 1350 ksi | ASTM D790 |
| Poissons Ratio | 0.40 | 0.40 | ASTM E132 |
| Shear Modulus | 3.45 GPa | 500 ksi | Calculated |
| Izod Impact, Notched | 1.10 J/cm @Thickness 3.18 mm, Temperature 23.0 °C |
2.06 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F |
Injection Molded; ASTM D256A |
| Izod Impact, Unnotched | 2.70 J/cm @Thickness 3.18 mm, Temperature 23.0 °C |
5.06 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F |
Injection Molded; ASTM D4812 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 18.0 µm/m-°C | 10.0 µin/in-°F | ASTM D696 |
| Deflection Temperature at 1.8 MPa (264 psi) | 77.8 °C @Thickness 6.35 mm |
172 °F @Thickness 0.250 in |
Annealed; ASTM D648 |
| UL RTI, Electrical | 50.0 °C | 122 °F | UL 746 |
| UL RTI, Mechanical with Impact | 50.0 °C | 122 °F | UL 746 |
| UL RTI, Mechanical without Impact | 50.0 °C | 122 °F | UL 746 |
| Flammability, UL94 | V-0 @Thickness 1.50 mm |
V-0 @Thickness 0.0591 in |
ALL; UL 94 |
| 5VA @Thickness 1.50 mm |
5VA @Thickness 0.0591 in |
ALL; UL 94 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 199 - 210 °C | 390 - 410 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Agency Ratings | NSF 61 | |
| Features | General Purpose | |
| High Flow | ||
| Filler / Reinforcement | Glass Fiber Reinforcement, 30% Filler by Weight | |
| Forms | Pellets | |
| Generic Material | PVC, Rigid | |
| Generic Name | Polyvinyl Chloride, Rigid (PVC, Rigid) | |
| Regional Availability | Africa & Middle East | |
| Asia Pacific | ||
| Europe | ||
| North America | ||
| South America | ||
| Uses | Fluid Handling | |
| General Purpose |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID® 66 GF 20 HTS PA6 reinforced with glass fiber, heat stabilized, hydrolysis resistant
- Lanxess Durethan® ECO BV 35 H2 900500 Nylon 6, 35% Glass Fiber
- Multibase Multi-Flex® D 2010 TPE Thermoplastic Elastomer
- Dow TUFLIN™ HSE-7002 NT 7 Linear Low Density Polyethylene Resin
- BASF Ultramid® B3EG7 BK 00564 35% Glass Filled PA6 (Conditioned)
- 3M Scotchlite™ 680CR-81 Removable Reflective Graphic Film with Comply™ Adhesive
- Beijing Ranger Chem PBT-201-G10 202 Environmental Protection Flame Retarding FR PBT
- Braskem GM8250 HDPE Blow Molding Polyethylene
- Ametek Tungsten-Copper Composites AWC 8020
- E-Polymers EFLEX® V1070 EPDM/TPV
Copyright © lookpolymers.com All Rights Reserved