POLYMER SEARCH

Plenco 1501 Polyester, Pellet, Injection Molded

Category	Polymer , Thermoset , Filled/Reinforced Thermoset , Polyester, TS , Thermoset Polyester, Mineral Filled
Manufacturer	Plenco (Plastics Engineering Company)
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Plenco 1501 Polyester, Pellet, Injection Molded.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

PLENCO 01501 is a general purpose, mineral filled granular polyester molding compound, offering excellent arc and track resistance properties, low post shrinkage, and improved mechanical strength values. UL recognized under component file E40654. 01501 is available in gray, blue, or tan color.Information supplied by Plenco.

Physical Properties	Metric	English	Comments
Bulk Density	0.820 g/cc	0.0296 lb/in³	ASTM D1895
Density	1.87 g/cc	0.0676 lb/in³	ASTM D792
Water Absorption	0.238 %	0.238 %	ASTM D570
Linear Mold Shrinkage	0.0091 cm/cm	0.0091 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell E	65	65	ASTM D785
Tensile Strength, Ultimate	47.0 MPa	6820 psi	ASTM D638
Elongation at Break	0.61 %	0.61 %	ASTM D638
Tensile Modulus	10.3 GPa	1490 ksi	ASTM D638
Flexural Strength	83.0 MPa	12000 psi	ASTM D790
Flexural Modulus	9.70 GPa	1410 ksi	ASTM D790
Compressive Strength	150 MPa	21800 psi	ASTM D695
Poissons Ratio	0.33	0.33	ASTM D638
Shear Modulus	3.87 GPa	561 ksi	Calculated
Izod Impact, Notched	0.198 J/cm	0.371 ft-lb/in	ASTM D256
Charpy Impact, Notched	0.218 J/cm²	1.04 ft-lb/in²	ASTM D256
Impact	133	133	J/m Drop Ball Impact; PLENCO

Thermal Properties	Metric	English	Comments
CTE, linear	46.0 µm/m-°C @Temperature 40.0 - 130 °C	25.6 µin/in-°F @Temperature 104 - 266 °F	TMA; ASTM E831
Maximum Service Temperature, Air	170 °C	338 °F	Heat Resistance; ASTM D570D
Deflection Temperature at 1.8 MPa (264 psi)	182 °C	360 °F	ASTM D648
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in
Oxygen Index	24 %	24 %	ASTM D2863
Shrinkage	0.038 %	0.038 %	72 hr, 120ºC; ASTM D1299

Electrical Properties	Metric	English	Comments
Volume Resistivity	6.60e+15 ohm-cm	6.60e+15 ohm-cm	ASTM D247
Dielectric Constant	4.9	4.9	ASTM D150
Dielectric Strength	10.5 kV/mm	267 kV/in	Step by Step; ASTM D149
	12.4 kV/mm	315 kV/in	Short Time; ASTM D149
Dielectric Breakdown	15400 V	15400 V	1hr 120C; ASTM D149
Dissipation Factor	0.0266	0.0266	ASTM D150
Arc Resistance	187 sec	187 sec	ASTM D495
Comparative Tracking Index	600 V	600 V	ASTM D3638

Users viewing this material also viewed the following: