- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene, Mineral Reinforced
- Plastcom PLASTALEN® PH 51 T 40 Polypropylene reinforced with mineral filler
Plastcom PLASTALEN® PH 51 T 40 Polypropylene reinforced with mineral filler
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Mineral Reinforced |
| Manufacturer | Plastcom spol. s r.o. |
| Trade Name | PLASTALEN® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Plastcom PLASTALEN® PH 51 T 40 Polypropylene reinforced with mineral filler.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Modified homopolymer PP for injection molding with the content of 40% mineral filler. General application. Delivered in black color.Information Provided by Plastcom spol. s r.o.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.25 g/cc | 0.0452 lb/in³ | STN EN ISO 1183-1 |
| Filler Content | 40 % | 40 % | |
| Melt Flow | 10 g/10 min @Load 2.16 kg, Temperature 230 °C |
10 g/10 min @Load 4.76 lb, Temperature 446 °F |
STN EN ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 28.0 MPa | 4060 psi | STN EN ISO 527-2 |
| Elongation at Break | 4.0 % | 4.0 % | STN EN ISO 527-2 |
| Tensile Modulus | 2.95 GPa | 428 ksi | STN EN ISO 527-2 |
| Flexural Strength | 48.0 MPa | 6960 psi | STN EN ISO 178 |
| Flexural Modulus | 2.85 GPa | 413 ksi | STN EN ISO 178 |
| Charpy Impact Unnotched | 1.40 J/cm² @Temperature -20.0 °C |
6.66 ft-lb/in² @Temperature -4.00 °F |
STN EN ISO 179 |
| 2.20 J/cm² @Temperature 23.0 °C |
10.5 ft-lb/in² @Temperature 73.4 °F |
STN EN ISO 179 | |
| Charpy Impact, Notched | 0.150 J/cm² @Temperature -20.0 °C |
0.714 ft-lb/in² @Temperature -4.00 °F |
STN EN ISO 179 |
| 0.200 J/cm² @Temperature 23.0 °C |
0.952 ft-lb/in² @Temperature 73.4 °F |
STN EN ISO 179 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 160 °C | 320 °F | STN EN 11357-1 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 200 - 250 °C | 392 - 482 °F | |
| Mold Temperature | 40.0 - 70.0 °C | 104 - 158 °F | |
| Drying Temperature | 80.0 °C @Time 14400 sec |
176 °F @Time 4.00 hour |
|
| Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Black |
Users viewing this material also viewed the following:
- PolyOne Edgetek® PK-20GF/000 Polyetheretherketone (PEEK), Glass Filled (discontinued **)
- Karina E 552-48/1-DT-IE Black PVC Compound
- Heatbath/Park Partherm 430 Heat Transfer Salt
- Solvay TECHNYL® A 230 PA66, DRY
- SABIC Innovative Plastics LNP THERMOCOMP UX08325 PPA (Asia Pacific)
- Borealis MG7547B Polyethylene
- Hexcel® HexForce™ 403 Fiber Glass Fabric
- ExxonMobil Santoprene® 241-45 Thermoplastic Elastomer (discontinued **)
- Lubrizol ESTANE® 58238 Ester Based Thermoplastic Polyurethane (European Grade)
Copyright © lookpolymers.com All Rights Reserved