- HOME
- POLYMER SEARCH
- Lubricant
- PTFE Gellant
- Nye Lubricants 813S-1 (FG) Synthetic Oil
Nye Lubricants 813S-1 (FG) Synthetic Oil
| Category | Fluid , Lubricant , PTFE Gellant , Silicone Base |
| Manufacturer | Nye Lubricants |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Nye Lubricants 813S-1 (FG) Synthetic Oil.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Nye Lubricants.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Viscosity Measurement | 373 | 373 | Viscosity Index of Base Oil; ASTM D2270 |
| Kinematic Viscosity at 40°C (104°F) | 53 cSt | 53 cSt | Base Oil; ASTM D445 |
| Kinematic Viscosity at 100°C (212°F) | 19 cSt | 19 cSt | Base Oil; ASTM D445 |
| Evaporation Loss | 0.10 % | 0.10 % | 24 hrs, 100C; ASTM D972 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Penetration P(0), 1/10 mm | 376 | 376 | ASTM D217 |
| Penetration P(60), 1/10 mm | 381 | 381 | ASTM D217 |
| Oil Separation | 7.1 % | 7.1 % | 24 hrs, 100C; FTM 719B, 321.2 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 200 °C | 392 °F | Recommended |
| Minimum Service Temperature, Air | -70.0 °C | -94.0 °F | Recommended |
| Pour Point | -73.0 °C | -99.4 °F | Base Oil; ASTM D97 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Base Fluid Type | Sil.(Clrphn) | |
| Gellant Type | PTFE |
Users viewing this material also viewed the following:
- PolyOne Bergamid™ B70 red RAL3001 Polyamide 6 (Nylon 6)
- LyondellBasell Petrothene® NA345009 Low Density Polyethylene (Film Extrusion)
- Indium Corp. 1072 VOC-Free Wave Solder Flux Containing Rosin
- A. Schulman POLYFORT™ FPP 1842 Homopolymer Polypropylene
- Master Bond EP21TPFL-1AO Two Part, Flexible, Lower Viscosity Epoxy Polysulfide System
- Epoxy Technology EPO-TEK® TV1002 Polyimide Adhesive
- 3M 2E98C Polyethylene Protective Tape
- Bhansali Engineering Abstron HI40I ABS Injection Molding Grade
- Haynes 230® alloy, 50% cold reduction, 1121°C anneal for 5 minutes
Copyright © lookpolymers.com All Rights Reserved