- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- NIZHNEKAMSKNEFTEKHIM PE 4252A (524H1) High Density Polyethylene
NIZHNEKAMSKNEFTEKHIM PE 4252A (524H1) High Density Polyethylene
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE |
| Manufacturer | NIZHNEKAMSKNEFTEKHIM Inc |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | NIZHNEKAMSKNEFTEKHIM PE 4252A (524H1) High Density Polyethylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.950 - 0.954 g/cc | 0.0343 - 0.0345 lb/in³ | Base Resin; ASTM D1505 |
| Melt Flow | 0.10 - 0.20 g/10 min @Load 5.00 kg, Temperature 190 °C |
0.10 - 0.20 g/10 min @Load 11.0 lb, Temperature 374 °F |
ASTM D1283/L |
| 2.0 - 4.0 g/10 min @Load 21.6 kg, Temperature 190 °C |
2.0 - 4.0 g/10 min @Load 47.6 lb, Temperature 374 °F |
Flow@21.6kg/Flow@5kg ratio < 20; ASTM D1283 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Film Tensile Strength at Yield, MD | >= 55.0 MPa | >= 7980 psi | ASTM D882 |
| Film Tensile Strength at Yield, TD | >= 45.0 MPa | >= 6530 psi | ASTM D882 |
| Film Elongation at Break, MD | >= 470 % | >= 470 % | ASTM D882 |
| Film Elongation at Break, TD | >= 570 % | >= 570 % | ASTM D882 |
| Tensile Modulus | >= 0.800 GPa | >= 116 ksi | 2% sec, TD; ASTM D882 |
| >= 0.900 GPa | >= 131 ksi | 2% sec, MD; ASTM D882 | |
| Elmendorf Tear Strength, MD | >= 0.433 g/micron | >= 11.0 g/mil | ASTM D1922 |
| Elmendorf Tear Strength, TD | >= 2.56 g/micron | >= 65.0 g/mil | ASTM D1922 |
| Dart Drop Test | >= 170 g | >= 0.375 lb | ASTM D1709 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Gel Content (pcs./m²) | 600 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Cycoloy® CU6800 PC+ABS
- Plansee DENAL® 917 108 XXX (3) Tungsten-Nickel-Iron-Cobalt Alloy
- UBE F023 Polyethylene
- Chase Plastics CP Pryme® NN300HSL (DAM) Nylon 66 (Utility Grade), Heat Stabilized, Internally Lubricated
- Dow Corning SYL-OFF® PMCPSL 10 Release Modifier
- DuPont Teijin Films Mylar® WRL63 Polyester Film, 200 Gauge
- 3M 9324 Squeak Reduction Tape
- E-Polymers SEPAZ® V230A 30% Glass Fiber Reinforced PPA
- Johnson Matthey Argo-braze 40N Silver Brazing Alloy for Tungsten Carbide Brazing
Copyright © lookpolymers.com All Rights Reserved