Murtfeldt Material ”S”® 8000 Polyethylene

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), UHMW PE Ultra High Molecular Weight
Manufacturer	Murtfeldt Kunststoffe GmbH & Co
Trade Name	Material ”S”®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Murtfeldt Material ”S”® 8000 Polyethylene.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Material ”S”® 8000 improves on the already impressive material properties of Original Material ”S”®. The self lubricating character of this material makes it ideally suited for use in sliding guides, slide segments, and slide bearings.Special Properties:• Self-lubricating - lower sliding friction coefficient• Increased wear resistance• Excellent impact/shock resistance• Good resistance to chemicals• Good anti-adhesion properties• Electrically isolating• Better resistance to UV rays than Original Material ”S”® green/naturalInformation provided by Murtfeldt Kunststoffe GmbH & Co. KG.

Physical Properties	Metric	English	Comments
Density	<= 0.930 g/cc	<= 0.0336 lb/in³	ISO 1183
Molecular Weight	9.00e+6 g/mol	9.00e+6 g/mol

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	65	65	DIN 53505
Ball Indentation Hardness	43.0 MPa	6240 psi
Tensile Strength	21.1 MPa	3060 psi	ISO 527
Elongation at Break	265 %	265 %	ISO 527
Modulus of Elasticity	0.700 GPa	102 ksi
Charpy Impact, Notched	>= 17.0 J/cm²	>= 80.9 ft-lb/in²	ISO 179
Coefficient of Friction, Dynamic	0.10 - 0.20	0.10 - 0.20
Sand Slurry	90	90	value in %

Thermal Properties	Metric	English	Comments
CTE, linear	170 µm/m-°C @Temperature 23.0 - 60.0 °C	94.4 µin/in-°F @Temperature 73.4 - 140 °F
Thermal Conductivity	0.400 W/m-K	2.78 BTU-in/hr-ft²-°F	ISO 52612
Maximum Service Temperature, Air	90.0 °C	194 °F	Short Term
	80.0 °C @Time 1.80e+7 sec	176 °F @Time 5000 hour
Minimum Service Temperature, Air	-200 °C	-328 °F
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Electrical Resistivity	>= 1.00e+16 ohm-cm	>= 1.00e+16 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+13 ohm	>= 1.00e+13 ohm	IEC 60093
Dielectric Strength	<= 45.0 kV/mm	<= 1140 kV/in	IEC 60243

Descriptive Properties	Value	Comments
Color	Anthracite

Users viewing this material also viewed the following: