- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE D 4701 GREY
Multibase Multi-Flex® TPE D 4701 GREY
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE D 4701 GREY.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The burn rate is 0.9 in/min (23 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.07 g/cc | 0.0387 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.013 cm/cm | 0.013 in/in | ASTM D955 |
| Melt Flow | 1.0 g/10 min | 1.0 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 47 | 47 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | >= 14.5 MPa | >= 2100 psi | ASTM D412 |
| Elongation at Break | >= 551 % | >= 551 % | ASTM D412 |
| Tear Strength | 87.8 kN/m | 501 pli | ASTM D624 |
Users viewing this material also viewed the following:
- Polymax® Maxelast® C4880 TPE, Transparent
- Ravago Manufacturing Americas Enviramid™ N1300HL Nylon 66
- Kazanorgsintez Proxamine 385
- LyondellBasell Astryn SB572C Polypropylene Copolymer
- Schwartz Technical Plastics LAMINEX® 2140 Cotton Fabric, Phenolic Resin Impregnated, MoS2 Filled
- Chosun Refractories MSM-39 High-Adhesion Mortar
- 3M 615+ Fire Barrier Duct Wrap
- Arlon 28571B015 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate
- BASF Pluracol® 2086 Slabstock Foam Polyol
Copyright © lookpolymers.com All Rights Reserved