- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE D 4310
Multibase Multi-Flex® TPE D 4310
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE D 4310.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Multi-Flex® D 4310 Natural was designed to replace Himont's CA 53 G material. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.910 g/cc | 0.0329 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.0129 cm/cm | 0.0129 in/in | ASTM D955 |
| Melt Flow | 7.5 g/10 min | 7.5 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 51 | 51 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | 17.2 MPa | 2490 psi | ASTM D638 |
| Elongation at Break | 1300 % | 1300 % | ASTM D638 |
| Flexural Strength | 14.0 MPa | 2030 psi | ASTM D790 |
| Flexural Modulus | 0.445 GPa | 64.5 ksi | method 1, Proc.B; ASTM D-790 |
| Gardner Impact | 23.2 J | 17.1 ft-lb | ASTM D3029 |
| Tear Strength | 96.3 kN/m | 549 pli | ASTM D624 |
Users viewing this material also viewed the following:
- Solvay Specialty Polymers Amodel® A-1133 NL WH 886 Polyphthalamide (PPA) (discontinued **)
- PolyOne Edgetek® NL-20CF/000 Nylon 6/12, Carbon Fiber Reinforced (discontinued **)
- LyondellBasell Lupolen® 2426 F LDPE, Film Grade
- LG Chemical LUPOY GN2101F PC+GF10%, Halogen Free, Flame Retardant, Heat Resistance
- Washington Penn Medium Impact Copolymer
- DuPont Teijin Films Melinex® 453 Polyester Film, 700 Gauge
- Adell AI-10 Nylon 66, Impact Modified
Copyright © lookpolymers.com All Rights Reserved