- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE A 8103 EP BLK
Multibase Multi-Flex® TPE A 8103 EP BLK
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE A 8103 EP BLK.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Ash is 24.7%. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.074 g/cc | 0.03880 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.0093 cm/cm | 0.0093 in/in | ASTM D955 |
| Melt Flow | 1.1 g/10 min | 1.1 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 84 | 84 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | 4.30 MPa | 624 psi | ASTM D412 |
| Elongation at Break | 406.1 % | 406.1 % | ASTM D412 |
| Flexural Modulus | 0.0567 GPa | 8.22 ksi | method 1, Proc.B; ASTM D-790 |
| Tear Strength | 33.5 kN/m | 191 pli | ASTM D624 |
Users viewing this material also viewed the following:
- NanoAmor 95%; OD: 80-200 nm Carbon Nanofibers
- Polykemi AB POLYfill PP CIQ15020 Polypropylene, Mineral Reinforced
- Polykemi AB POLYabs F00L ABS
- M Chemical GUARD DOGâ„¢ UV770 HALS Light Stabilizer
- IDI Composites 46-16-60 Thermoset Polyester, Sheet
- H.C. Starck Grade UF 10 Silicon Carbide, SiC
- Barlog Plastics KEBAFLOW HF140 LCP, 40% glass fiber reinforced
- ExxonMobil Oppalyte™ 30MW747 OPP Film
- REXtac Rextac® RT 3330 Amorphous Polyalphaolefin (APAO)
- Overview of materials for Polyphthalamide (PPA), 30% Glass Fiber Reinforced
Copyright © lookpolymers.com All Rights Reserved