- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE A 7318 GREY
Multibase Multi-Flex® TPE A 7318 GREY
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE A 7318 GREY.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.00 g/cc | 0.0361 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.015 cm/cm | 0.015 in/in | ASTM D955 |
| Melt Flow | 10 - 15 g/10 min | 10 - 15 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 78 | 78 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | 8.30 MPa | 1200 psi | ASTM D412 |
| Elongation at Break | >= 600 % | >= 600 % | ASTM D412 |
| Flexural Modulus | 0.0345 GPa | 5.00 ksi | method 1, Proc.B; ASTM D-790 |
| Tear Strength | >= 8.30 kN/m | >= 47.4 pli | ASTM D624 |
Users viewing this material also viewed the following:
- Polymax® Maxelast® P1945 TPE, PP Overmold or Standalone use
- Garlock 7797 Neoprene Sheet Rubber
- MetalTek C81500 Chrome Copper High Conductivity
- Lubriplate Super GPO L0754 Heavy-Duty Motor Oil Motor Oil & Transmission Fluid
- Teknor Apex Fireguard® 910-LBF Polyvinyl Chloride, Flexible
- A. Schulman POLYBATCH™ Grey LL80316/3 Concentrate Based In LLDPE
- Buckeye Polymers BP FLEX A6310 BLK Thermoplastic Elastomer SEBS
- BASF Elastollan 598 A TPUR
- CPT C-Flex® R70-190 Opaque Biocompatible TPE
- Aaron Industries AVPE LD 300-1 MELT 20 Virgin Polyethylene
Copyright © lookpolymers.com All Rights Reserved