- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE A 6900 LC BLK
Multibase Multi-Flex® TPE A 6900 LC BLK
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE A 6900 LC BLK.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.40 g/cc | 0.0506 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.015 cm/cm | 0.015 in/in | ASTM D955 |
| Melt Flow | 1.0 - 4.0 g/10 min | 1.0 - 4.0 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 70 | 70 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | >= 3.45 MPa | >= 500 psi | ASTM D412 |
| Elongation at Break | >= 300 % | >= 300 % | ASTM D412 |
| Tear Strength | 27.15 kN/m | 154.9 pli | ASTM D624 |
Users viewing this material also viewed the following:
- TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with TP-95
- Ineos 3950 Polypropylene Impact Copolymer
- Sharadaa Ceramics PCF90 Precast Prefired Brick
- Eagle Brass 70265 XP175, 1/2 Hard
- DSM Akulon® K222-D (Cond.) Low Viscosity Nylon 6 (North America)
- DAK Americas Laser+® C 9921 (F65A) PET
- BASF Ultramid® A3HG5 25% Glass Filled PA66 (Dry)
- Arlon 930-10Xxx-P0 0.030" (0.762 mm) Self-Fusing Silicone Tape
Copyright © lookpolymers.com All Rights Reserved