- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE A 6221 HR BLK
Multibase Multi-Flex® TPE A 6221 HR BLK
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE A 6221 HR BLK.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kratonâ„¢ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.20 g/cc | 0.0434 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.012 cm/cm | 0.012 in/in | ASTM D955 |
| Melt Flow | 10 - 15 g/10 min | 10 - 15 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 55 | 55 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | >= 2.60 MPa | >= 377 psi | ASTM D412 |
| Elongation at Break | >= 600 % | >= 600 % | ASTM D412 |
| Flexural Modulus | 0.0345 GPa | 5.00 ksi | method 1, Proc.B; ASTM D-790 |
| Tear Strength | >= 26.5 kN/m | >= 151 pli | ASTM D624 |
Users viewing this material also viewed the following:
- Solvay Specialty Polymers Amodel® A-4422 LS WH118 Polyphthalamide (PPA) (Unverified Data**)
- Ineos L40N-00 Polypropylene Impact Copolymer
- Lubriplate APG 80W-140 Petroleum-Based Gear, Bearing, & Recirculating Oil
- Solvay TECHNYL® A 216 PA66, DRY
- Shin-Etsu Silicones KE-571U Silicone Elastomer
- Chase Plastics CP Pryme® NN300STL (COND, 50% RH) Nylon 66 (Utility Grade), Super Toughened, Internally Lubricated
- Zircar Ceramics AL-30 Alumina Insulation
- Loctite® 3701 Acrylic Light Cure Adhesive
- 3M Novec™ 4300 Electronic Surfactant
Copyright © lookpolymers.com All Rights Reserved