- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE A 5703 BLK Low AO
Multibase Multi-Flex® TPE A 5703 BLK Low AO
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE A 5703 BLK Low AO.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The burn rate is 1.2 in/min (30 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.910 g/cc | 0.0329 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.014 cm/cm | 0.014 in/in | ASTM D955 |
| Melt Flow | 2.0 - 5.0 g/10 min | 2.0 - 5.0 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 55 | 55 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D412 |
| Elongation at Break | >= 700 % | >= 700 % | ASTM D412 |
| Tear Strength | >= 30.0 kN/m | >= 171 pli | ASTM D624 |
Users viewing this material also viewed the following:
- PolyOne Geon™ Vinyl Wire & Cable WJMF113L Polyvinyl Chloride, Flexible (PVC, Flexible)
- Quantum PET
- Karina E 34/20-RG-PO Lilac Color Concentrate for PVC
- SABIC Innovative Plastics ULTEM STM1700 PEI Copolymer (Europe-Africa-Middle East)
- A. Schulman SCHULAMID® 66 GF13 13% Glass Fiber Reinforced Nylon 66
- Arkema Group Nakan® FMS 801 L PVC, Soft Injection Molding Grade
- Ametek P430L P/M Stainless Steel, Sintered from 7.0 g/cc Green Density
- Solvay Specialty Polymers Ixan® SGA-1 Polyvinylidene Chloride (PVDC) (Unverified Data**)
Copyright © lookpolymers.com All Rights Reserved