Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Momentive Performance Materials RTV159 High Strength Silicone Adhesive Sealant, Red

Category Polymer , Adhesive , Thermoset , Silicone , Silicone, RTV, Adhesive/Sealant Grade
Manufacturer Momentive Performance Materials (Former GE Silicones)
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Momentive Performance Materials RTV159 High Strength Silicone Adhesive Sealant, Red.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
RTV 159 is a one component, ready-to-use, high strength silicone rubber adhesive sealant. It cures to tough resilient silicone rubber on exposure to atmospheric moisture at room temperature. RTV159 sealant also provides high temperature performance. It releases acetic acid vapors as a by-products of cure.RTV159 sealant is a paste consistency product which can be applied to horizontal, vertical, and overhead surfaces in applications requiring high strength and temperature performance.Since this adhesive sealants utilizes a moisture cure system, it must not be used in thicknesses greater than 6mm(1/4in.). Where section depths exceed 6mm (1/4 in.), GE Silicones one-component, addition cure or two-component silicone rubber compounds are suggested.This sealant was not designed for and should not be used for applications intended for permanent implantation into the human body.Mechanical properties for specimen cured 3 days at 25°C and 50% relative humidity.Key Performance Properties: High strengthHigh temperature performanceLow temperature flexibilityOne-componentRoom temperature cureGeneral primerless adhesionExcellent electrical insulation propertiesExcellent weatherability, ozone, and chemical resistanceGE Silicones became a part of Momentive Performance Materials in 2006.
Physical Properties Metric English Comments
Specific Gravity 1.09 g/cc
1.09 g/cc
Linear Mold Shrinkage 0.010 cm/cm
0.010 in/in
Mechanical Properties Metric English Comments
Hardness, Shore A 28
28
Tensile Strength, Ultimate 7.07 MPa
1030 psi
Cured 7 days at 25°C and 50% relative humidity
Elongation at Break 825 %
825 %
Tear Strength 15.8 kN/m
90.2 pli
Peel Strength 10.5 kN/m
60.0 pli
Cured 7 days at 25°C and 50% relative humidity
Thermal Properties Metric English Comments
CTE, linear 270 µm/m-°C

@Temperature 20.0 °C
150 µin/in-°F

@Temperature 68.0 °F
Thermal Conductivity 0.209 W/m-K
1.45 BTU-in/hr-ft²-°F
Maximum Service Temperature, Air 260 °C
500 °F
Continuous
315 °C
599 °F
Intermittent
Brittleness Temperature -60.0 °C
-76.0 °F
Electrical Properties Metric English Comments
Volume Resistivity 1.10e+15 ohm-cm
1.10e+15 ohm-cm
Dielectric Constant 2.6
2.6
Dielectric Strength 19.7 kV/mm
500 kV/in
Dissipation Factor 0.00070
0.00070
Processing Properties Metric English Comments
Cure Time 45.0 min
0.750 hour
Tack-free
Descriptive Properties Value Comments
Application rate 175 g/min
Color Red
Consistency Paste
Copyright © lookpolymers.com All Rights Reserved