- HOME
- POLYMER SEARCH
- Glass
- Glass Ceramic
- Möller Medical PolySkin 80 NanoCoating
Möller Medical PolySkin 80 NanoCoating
| Category | Ceramic , Glass , Glass Ceramic , Other Engineering Material , Ceramic/Metallic Coating |
| Manufacturer | Moeller Medical (Möller Medical) |
| Trade Name | PolySkin |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Möller Medical PolySkin 80 NanoCoating.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Flexible, non-abrasive, decorative coating hardening at room temperature up to 120°C.Information provided by Möller Medical, Member of CENTROTEC Group
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Thickness | 15.0 - 40.0 microns | 0.591 - 1.57 mil |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Taber Abrasion, mg/1000 Cycles | 33 | 33 | CS17 friction disc with 500g load; DIN 53754 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 200 °C | 392 °F |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 25.0 - 120 °C | 77.0 - 248 °F | Hardening Temperature |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Applicable Substrate | ABS | with restrictions |
| Aluminum | ||
| Brass | ||
| Copper | ||
| Glass | ||
| Nylon | with restrictions | |
| PMMA | with restrictions | |
| Polycarbonate | with restrictions | |
| Stainless Steel | ||
| Contact Angle to Water [deg] | 80 | |
| Cupping Test [mm] | 8.4 | DIN EN ISO 1520 |
| Non-Applicable Substrate | Tubes int. dia. 0.1-10 mm | |
| Pendulum Dampening Test [sec] | 160-180 | DIN EN ISO 1522 |
Users viewing this material also viewed the following:
- TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 60 PHR Hi-Sil 233 Filler
- Industrial Laminates/Norplex NP664 Paper Base Laminate
- Samsung Cheil Industries Starex® VE-1805 HIPS, Unreinforced FR
- EPICHEM Epiryl B PPO Polyphenylene oxide
- Astro Met ZTA 96 Zirconia Toughened Alumina
- SABIC Innovative Plastics LNP VERTON NV004E PC+ABS (Asia Pacific)
- Arkema Group Oroglas® VM Acrylic, Injection Molding Grade (discontinued **)
- DuPont Elvax® 3173SHB Ethylene-Vinyl Acetate Copolymer Resin for Coextrusion, Blown Film (discontinued **)<
Copyright © lookpolymers.com All Rights Reserved