- HOME
- POLYMER SEARCH
- Glass
- Glass Ceramic
- Möller Medical NanoSkin 75 NanoCoating
Möller Medical NanoSkin 75 NanoCoating
| Category | Ceramic , Glass , Glass Ceramic , Other Engineering Material , Ceramic/Metallic Coating |
| Manufacturer | Moeller Medical (Möller Medical) |
| Trade Name | NanoSkin |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Möller Medical NanoSkin 75 NanoCoating.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Non-abrasive coating with extreme chemical resistance, also applicable for plastics substrates.Information provided by Möller Medical, Member of CENTROTEC Group
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Thickness | 5.00 - 50.0 microns | 0.197 - 1.97 mil |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Taber Abrasion, mg/1000 Cycles | 10 | 10 | CS17 friction disc with 500g load; DIN 53754 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 200 °C | 392 °F |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 80.0 - 150 °C | 176 - 302 °F | Hardening Temperature |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Applicable Substrate | ABS | with restrictions |
| Aluminum | ||
| Brass | ||
| Copper | ||
| Glass | ||
| Nylon | ||
| PMMA | ||
| Polycarbonate | ||
| Stainless Steel | ||
| Tubes int. dia. 0.1-10 mm | ||
| Biocompatibility | Biocompatible | One-parametric cytotoxicity test |
| Contact Angle to Water [deg] | 75 | |
| Cupping Test [mm] | 1.2 | DIN EN ISO 1520 |
| Pendulum Dampening Test [sec] | 140-160 | DIN EN ISO 1522 |
Users viewing this material also viewed the following:
- Plaskolite West Optix® CA-927 Impact Modified Acrylic Resin
- Pyrotek Pyrite N-17 Refractory Board
- GrafTech GRAFOIL® GHL Standard Fluid Sealing Grade GHL Laminate
- Haynes 188 alloy, plate at RT after 8000 hours at 760°C (1400°F)
- Solvay Chemicals Barium carbonate coarse powder
- Saint-Gobain Chemfab® q-GUARD® 35 Insulation Jacketing
- A. Schulman LP552-01 Injection Molding, Extrusion Grade Compound
- A. Schulman POLYBATCH™ Weatherwood 60190U Concentrate Based In LLDPE
- BASF Elastollan® 1154D Polyether Type Polyurethane Elastomer
Copyright © lookpolymers.com All Rights Reserved