Lubrizol Estane® S385A Thermoplastic Polyurethane

Category	Polymer , Thermoplastic , Polyurethane, TP , Thermoplastic Polyurethane (TPUR), Polyester Grade
Manufacturer	Lubrizol (former Noveon)
Trade Name	ESTANE®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Lubrizol Estane® S385A Thermoplastic Polyurethane.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Type: Estane® S385A is a Shore 85A, polyester based thermoplastic polyurethane (TPU) with excellent transparency. FDA approved (21 CFR 177.2600, 177.1680).Uses: Injection Molding.Information Provided by The Lubrizol Corporation

Physical Properties	Metric	English	Comments
Specific Gravity	1.19 g/cc	1.19 g/cc	ASTM D792
Linear Mold Shrinkage	0.026 cm/cm	0.026 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	85	85	ASTM D2240
Tensile Strength, Ultimate	34.3 MPa	4980 psi	ASTM D412
Tensile Strength, Yield	5.39 MPa	782 psi	at 100% elongation; ASTM D412
	9.81 MPa	1420 psi	at 300% elongation; ASTM D412
Elongation at Break	780 %	780 %	ASTM D412
Tear Strength	93.2 kN/m	532 pli	Die C; ASTM D624
Abrasion	35	35	mm<sup>3</sup> loss; ISO 4649
Compression Set	15 % @Temperature 23.0 °C, Time 79200 sec	15 % @Temperature 73.4 °F, Time 22.0 hour	ASTM D395
	45 % @Temperature 70.0 °C, Time 79200 sec	45 % @Temperature 158 °F, Time 22.0 hour	ASTM D395

Thermal Properties	Metric	English	Comments
Vicat Softening Point	62.0 °C	144 °F	ASTM D1525

Processing Properties	Metric	English
Feed Temperature	180 - 195 °C	356 - 383 °F
Nozzle Temperature	190 - 205 °C	374 - 401 °F
Mold Temperature	10.0 - 40.0 °C	50.0 - 104 °F
Drying Temperature	70.0 - 80.0 °C	158 - 176 °F
Dry Time	4.00 - 5.00 hour	4.00 - 5.00 hour
Injection Pressure	11.7 - 15.9 MPa	1700 - 2300 psi
Hold Pressure	8.27 - 12.4 MPa	1200 - 1800 psi
Back Pressure	0.207 - 0.552 MPa	30.0 - 80.0 psi
Cycle Time - Injection	25 - 35 sec	25 - 35 sec
Screw Speed	180 - 220 rpm	180 - 220 rpm

Descriptive Properties	Value	Comments
Injection time (s)	12-18
Metering Zone	185-200°C

Users viewing this material also viewed the following: