Lubrizol ESTANE® 58315 Ether Based Thermoplastic Polyurethane

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Ether Grade
Manufacturer	Lubrizol (former Noveon)
Trade Name	ESTANE®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Lubrizol ESTANE® 58315 Ether Based Thermoplastic Polyurethane.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Features: Very good physical properties, hydrolysis resistance, low temperature performance and abrasion. Wide processing window for extrusion.Uses: Blown and flat die/cast film extrusion, Injection molding and cable jacketing.Available in Americas, Europe, Middle East, Africa, India and AsiaInformation provided by Lubrizol.

Physical Properties	Metric	English	Comments
Specific Gravity	1.12 g/cc	1.12 g/cc	ASTM D792
Maximum Moisture Content	0.020	0.020

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	82 - 88 @Time 5.00 sec	82 - 88 @Time 0.00139 hour	ASTM D2240
Tensile Strength	48.3 MPa	7010 psi	ASTM D412
	33.81 MPa @Temperature 75.0 °C, Time 4.838e+6 sec	4904 psi @Temperature 167 °F, Time 1344 hour	30 Mil Sheet, Immersion in Water
	39.12 MPa @Temperature 75.0 °C, Time 605000 sec	5674 psi @Temperature 167 °F, Time 168 hour	30 Mil Sheet, Immersion in Water
	39.12 MPa @Temperature 75.0 °C, Time 1.21e+6 sec	5674 psi @Temperature 167 °F, Time 336 hour	30 Mil Sheet, Immersion in Water
	46.85 MPa @Temperature 75.0 °C, Time 2.82e+6 sec	6795 psi @Temperature 167 °F, Time 784 hour	30 Mil Sheet, Immersion in Water
	48.3 MPa @Temperature 75.0 °C, Time 0.000 sec	7010 psi @Temperature 167 °F, Time 0.000 hour	30 Mil Sheet, Immersion in Water
Elongation at Break	570 %	570 %	ASTM D412
100% Modulus	0.00620 GPa	0.899 ksi	ASTM D412
300% Modulus	0.0103 GPa	1.49 ksi	ASTM D412
Tear Strength	26.3 kN/m	150 pli	Trosuer; ASTM D470
Graves Tear Strength	85.9 kN/m	490 pli	Die C; ASTM D624
Taber Abrasion, mg/1000 Cycles	37	37	H18, 1000g; ASTM D3389 B
Tensile Set	14 %	14 %	200% elongation; ASTM D412

Thermal Properties	Metric	English	Comments
Melting Point	135 °C	275 °F	DSC
	145 °C	293 °F	Kofler
Glass Transition Temp, Tg	-50.0 °C	-58.0 °F	DSC

Optical Properties	Metric	English	Comments
Haze	1.8 %	1.8 %	pressed between glass; ASTM D1003

Processing Properties	Metric	English	Comments
Zone 1	171 °C	340 °F	Extrusion
Zone 2	177 °C	351 °F	Extrusion
Zone 3	182 °C	360 °F	Extrusion
Zone 4	188 °C	370 °F	Extrusion
Adapter Temperature	188 °C	370 °F	5, Extrusion
Die Temperature	188 °C	370 °F	6, Zone 1, Extrusion
	188 °C	370 °F	Zone 2, Extrusion
Drying Temperature	104 °C	219 °F
Dry Time	2.00 - 4.00 hour	2.00 - 4.00 hour
Dew Point	-40.0 °C	-40.0 °F

Users viewing this material also viewed the following: