- HOME
- POLYMER SEARCH
- Thermoplastic
- Polysulfone (PSU)
- Lehmann & Voss LUVOCOM® 1503-7986 Polysuper sulfone, with glass fiber and PTFE
Lehmann & Voss LUVOCOM® 1503-7986 Polysuper sulfone, with glass fiber and PTFE
| Category | Polymer , Thermoplastic , Polysulfone (PSU) |
| Manufacturer | Lehmann & Voss & Co. |
| Trade Name | LUVOCOM® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Lehmann & Voss LUVOCOM® 1503-7986 Polysuper sulfone, with glass fiber and PTFE.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Applications: Automotive industry, office machinery, medical- and precision engineering.High continuous use and heat distortion temperature. Non flammable.Strong, stiff parts.Improved friction and wear behaviour. Emergency running property.High chemical resistance parts.Control disks, cams, sliding elements and other duty parts.Information provided by Lehmann & Voss & Co.KG
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.72 g/cc | 1.72 g/cc | ISO 1183 |
| Water Absorption | <= 0.30 % | <= 0.30 % | 23°C/24h |
| Linear Mold Shrinkage | 0.0020 - 0.0040 cm/cm | 0.0020 - 0.0040 in/in | |
| Melt Flow | 8.0 g/10 min @Load 5.00 kg, Temperature 380 °C |
8.0 g/10 min @Load 11.0 lb, Temperature 716 °F |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Stress | 125 MPa | 18100 psi | |
| Elongation at Yield | 2.0 % | 2.0 % | |
| 2.5 % | 2.5 % | flexural | |
| Modulus of Elasticity | 10.0 GPa | 1450 ksi | |
| Flexural Strength | 180 MPa | 26100 psi | |
| Flexural Modulus | 9.00 GPa | 1310 ksi | |
| Charpy Impact Unnotched | 3.50 J/cm² | 16.7 ft-lb/in² | edgewise; ISO 179 1eU |
| Charpy Impact, Notched | 1.20 J/cm² | 5.71 ft-lb/in² | ISO 179 1eA |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 185 °C | 365 °F | |
| 220 °C | 428 °F | short term | |
| Deflection Temperature at 1.8 MPa (264 psi) | 210 °C | 410 °F | |
| Flammability, UL94 | V-0 | V-0 | not recognized by UL |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistance | >= 1.00e+14 ohm | >= 1.00e+14 ohm | |
| Insulation Resistance | >= 1.00e+14 ohm | >= 1.00e+14 ohm |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 350 °C | 662 °F | mass temp |
| Nozzle Temperature | 350 - 370 °C | 662 - 698 °F | |
| Zone 1 | 330 - 350 °C | 626 - 662 °F | |
| Zone 2 | 340 - 360 °C | 644 - 680 °F | |
| Zone 3 | 350 - 370 °C | 662 - 698 °F | |
| Mold Temperature | 150 - 170 °C | 302 - 338 °F | |
| Drying Temperature | 150 °C @Time 10800 - 18000 sec |
302 °F @Time 3.00 - 5.00 hour |
Air-Circulation Dryer |
| 160 °C @Time 10800 - 14400 sec |
320 °F @Time 3.00 - 4.00 hour |
Dehumidifying dryer |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | natural color (beige) |
Users viewing this material also viewed the following:
- TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 120 PHR N330 Filler
- Lucas-Milhaupt 60 Sn-40 Pb Tin/ Silver Solder
- Gouda Vuurvast VIBRON 160 K 50 Dense Vibrating Refractory Castable
- Styrolution Luran® 378 P G7 35% Glass Filled SAN
- A. Schulman POLYBATCH™ Bright Pink 50379 Concentrate Based In Polyethylene
- Dow AIM® 4800 High Impact Styrenic Resin
- 3M 15CV826 General Purpose Temporary Surface Protection Tape
- BASF Ultramid® A27 E 01 PA66 (Dry)
- BASF Ultramid® A3HG5 LS BK 23189 25% Glass Filled PA66 (Dry)
Copyright © lookpolymers.com All Rights Reserved