LNP Thermocomp® LF-1006 MG Polyetheretherketone, Glass milled Glass Fiber (discontinued **)

Category	Polymer , Thermoplastic , Polyketone , Polyetheretherketone (PEEK) , Polyetheretherketone, PEEK, Glass Fiber Filled
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	LNP Thermocomp® LF-1006 MG Polyetheretherketone, Glass milled Glass Fiber (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Features: Low WarpageForms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are still active under new names instituted after the SABIC purchase.

Physical Properties	Metric	English	Comments
Specific Gravity	1.53 g/cc	1.53 g/cc	Method A; ASTM D792

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	139 MPa	20200 psi	ASTM D638
Elongation at Break	2.2 %	2.2 %	ASTM D638
Tensile Modulus	9.72 GPa	1410 ksi	ASTM D638
Flexural Strength	207 MPa	30000 psi	ASTM D790
Flexural Modulus	9.38 GPa	1360 ksi	ASTM D790
Izod Impact, Notched	0.267 J/cm @Thickness 3.18 mm	0.500 ft-lb/in @Thickness 0.125 in	ASTM D256

Processing Properties	Metric	English	Comments
Melt Temperature	379 - 388 °C	714 - 730 °F
Mold Temperature	135 - 163 °C	275 - 325 °F
Drying Temperature	121 - 149 °C	250 - 300 °F
Dry Time	4 hour	4 hour
Moisture Content	0.10 %	0.10 %	Suggested
Back Pressure	0.345 - 0.689 MPa	50.0 - 99.9 psi

Users viewing this material also viewed the following: