LNP Thermocomp® HF-1006 Polyamide 11, Glass Fiber Reinforcement (discontinued **)

Category	Polymer , Thermoplastic , Nylon , Nylon 11
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	LNP Thermocomp® HF-1006 Polyamide 11, Glass Fiber Reinforcement (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Forms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are still active under new names instituted after the SABIC purchase.

Physical Properties	Metric	English	Comments
Specific Gravity	1.26 g/cc	1.26 g/cc	Method A; ASTM D792
Water Absorption	0.10 %	0.10 %	at 24 hrs; ASTM D570
Linear Mold Shrinkage	0.0010 - 0.0020 cm/cm	0.0010 - 0.0020 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.0060 - 0.0070 cm/cm	0.0060 - 0.0070 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	134 MPa	19400 psi	ASTM D638
Tensile Strength, Yield	134 MPa	19400 psi	ASTM D638
Elongation at Break	6.2 %	6.2 %	ASTM D638
Elongation at Yield	5.3 %	5.3 %	ASTM D638
Tensile Modulus	7.38 GPa	1070 ksi	ASTM D638
Flexural Strength	193 MPa	28000 psi	ASTM D790
Flexural Modulus	6.21 GPa	901 ksi	ASTM D790
Izod Impact, Notched	2.56 J/cm @Thickness 3.18 mm	4.80 ft-lb/in @Thickness 0.125 in	ASTM D256
Izod Impact, Unnotched	14.3 J/cm @Thickness 3.18 mm	26.8 ft-lb/in @Thickness 0.125 in	ASTM D256
Izod Impact, Notched (ISO)	25.3 kJ/m²	12.0 ft-lb/in²	ISO 180
Izod Impact, Unnotched (ISO)	87.8 kJ/m²	41.8 ft-lb/in²	ISO 180
Falling Dart Impact	16.7 J	12.3 ft-lb	ASTM D3763
Impact Test	6.72 J	4.96 ft-lb	Multi-Axial Instrumented Impact Energy; ISO 6603-2

Thermal Properties	Metric	English	Comments
CTE, linear	34.0 µm/m-°C @Temperature 20.0 °C	18.9 µin/in-°F @Temperature 68.0 °F	TMA; ASTM E831
CTE, linear, Transverse to Flow	99.0 µm/m-°C @Temperature 20.0 °C	55.0 µin/in-°F @Temperature 68.0 °F	TMA; ASTM E831
Deflection Temperature at 1.8 MPa (264 psi)	178 °C	352 °F	Unannealed; ASTM D648

Processing Properties	Metric	English	Comments
Melt Temperature	227 - 260 °C	441 - 500 °F
Mold Temperature	43.3 - 51.7 °C	110 - 125 °F
Drying Temperature	82.2 °C	180 °F
Dry Time	4 hour	4 hour
Moisture Content	0.15 %	0.15 %	Suggested
Back Pressure	0.172 - 0.345 MPa	24.9 - 50.0 psi

Users viewing this material also viewed the following: